Technical information

- -
14
Recoding a Memo:
This allows you to record a voice message as a reminder or as a message to
someone and it will be shown as a new message. To record such a message, follow
these steps:
1. While in standby mode, press and hold “MEMO” until it announces “Please
speak after the tone, to end recording press stop”.
2. Speak clearly and you can record up to 3 minutes, press “STOP” to end.
The display will now show you have an added new message.
Selecting a Language:
The VM-150 announces all voice prompts in 3 languages-- English (Default), French
& Spanish. If you like to select these voice prompts in French or Spanish, follow
these steps:
1. While in the standby mode, press and hold “VOL +” for 3 seconds until it
announces “French is selected” (in French).
2. To select Spanish , repeat step 1 until it announces “Spanish is selected”
(in Spanish).
3. To select English, repeat step 1 again until it announces “English has been
selected”
Set Security Code:
The factory default security code is 0000, to overwrite and set your own
security code, follow these steps:
1. While in standby mode, press “CODE” key once, the machine will then
announce your current code “Your security code is 0000.
press and hold “CODE” key for 3 seconds until it announces “Security Code