Technical information

- -
15
setting, the first digit, 0”. Press “Vol+ or Vol- “ keys to select the number
(shown on the display) you want. Press the “CODE” key to confirm.
2. The machine announces; “the second digit, 0”. Press again the “VOL+” or
“VOL-” key to choose a number as the second digit, then press “CODE” key
to confirm.
3. Repeat the above steps for the 3
rd
and 4
th
digits.
4. After confirming the 4
th
digit of the new security code, the machine will
instantly announce the new security code; i.e. “Your security code is XXXX”
and returns to standby mode.
Note: During security code setting, if no key is input within 8 seconds, the set up
procedure will be abandoned.
Remote message retrieval:
1. Call the number where you have your VM-150. Wait for the OGM (Out Going
Message) to finish and you hear the tone, enter your security code on the key
pad.
2. After security code has been entered, the answering machine starts playing all
new messages.
3. After it has played all new messages, it will announce, “Press “1” to go to main
menu”.
See below for all menu options:
Press 2: To play all new messages
Press 3: To play all messages
Press 4: To Delete all old messages
Press 5: To set answering machine ON or OFF
Press 6: To record new OGM
Press 9 * : Change new security code (for security reason, this option will be