User Manual

1 2 3
www.SereneLifeHome.com
Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property loss.
Warnings
1. Proper conguration of all passwords and other security settings
is the responsibility of the installer and end user.
2. In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region.
Please refer to technical specications for detailed information.
3. Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 100 to 240 VAC or 5
VDC according to the IEC60950-1 standard. Please refer to
technical specications for detailed information.
4. Do not connect several devices to one power adapter as adapter
overload may cause overheating or a re hazard.
5. Please make sure that the plug is rmly connected to the power
socket.
6. If smoke, odor or noise rise from the device, turn o the power
at once and unplug the power cable, and then please contact
the service center.
www.SereneLifeHome.com
1. Install "MIPC" APP
Method I: Download APP in: www.mipcm.com/download;
Method II: Scan to Download:
Method III: Download "MIPC" APP from APP Store (iOS) or
Play Store (Android).
2. Register an Account
Open "MIPC" APP, click "register" button, register & log in as
instructed (For your account safety & retrive password,
we suggest you to bind with email before log in).
www.SereneLifeHome.com
3. Add Camera
Click on "+" in top left corner, choose "PTZ cameras"
(FIX/Cloud box/ Panoramic), scan the QR code on bottom of the
camera, and tap the "Add" button to enter the network
connection interface.
4. Select Network Connection
You could choose either "Sound connection" or
"Ethernet connection" to connect the camera.
Note:
1. Press RESET for 1 second to enter Wi-Fi conguration; press for
10 seconds or longer to restore to factory settings (when you
hear a chime, then setting successfully).
2. Try "Ethernet connection" if "Sound connection" unsuccessful.
www.SereneLifeHome.com
Option 1: Sound connection
a. Click the "Sound connection" icon, setting up Wi-Fi for camera
(only support 2.4GHZ), input the Wi-Fi password;
b. Power on the device (30-60 seconds after you connect the power,
you will hear the chime and the IR light will turn o,
now camera is powered on);
c. 1. Click the "Already heard the voice hint" if you hear the
chime, and wait until successfully connected.
2. If no chime heard, please press the RESET button for 1 second,
you will hear the voice prompt say "Waiting for receiving
the wireless conguration", click "Already heard the
voice hint", and wait until successfully connected.
Prompt: Our APP will be in continuously update for better users
experience. The actual operation interface may not accordance
with this manual, please operate according to APP.