User Manual

Motion Detection and Notication Settings Explained

You can set notication settings separately for any camera in your account.

To access the notication settings, select your camera, and go to the settings

tap - then scroll down to "motion detection"

Slide the slider to enable motion detection

You can then choose what actions you would like to occur when you r camera

detections motion.

I/O alarm will send a signal to any equipment you have attached to the camera

I/O output ports. Snap Shotwill record a still image to the SD card in your

camera. Recordwill record video to the SD card while the camera detects motion.

You can also turn push notications on and o by selecting "turn alert on" or

"turn alert o".