IPCAMHD45 IPCAMHD80 IPCAMHD50 IPCAMHD85 IPCAMHD45 - IPCAMHD50 - IPCAMHD80 - IPCAMHD85 IP Camera WiFi Cam HD Network Camera with Remote App Control, 720p
TABLE OF CONTENTS: PRODUCT STRUCTURE DIAGRAM ------------------------------------------------------------------------------------------------ 1 SETUP AN ACCOUNT USERNAME ------------------------------------------------------------------------------------------------- 2 ADD CAMERA TO APP ------------------------------------------------------------------------------------------------------------------------------ 3 CONNECT TO YOUR NETWORK -----------------------------------------------------------------------
Product Structure Diagram 1 www.SerenLifeHome.
Don't forget to register your camera with us online to get a free 1 year manufacturer's warranty! Just go to www.SereneLifeHome.com `SereneViewer’ APP Installation A. Scan 'SereneViewer' APP QR code or search to download the app. iOS Andriod Setup an Account Username Create your camera username - 6 characters min - Do not use email address Click "Sign Up" Note: This user name will be used to access all of your cameras from the app or PC. www.SerenLifeHome.
Create an account password - Click "Sign Up" Note: This will be used to log in to all of the cameras on your account and can be separate from the camera password Add Camera to APP 1. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the device ID QR code. 3 www.SerenLifeHome.
Connect to Your Network Choose method 1 or 2 for setup Method 1: Wired Setup -Connect power, Ethernet cable as above. -Wait 50 seconds for ( ) indicator on the camera to flash green -After scanning QR code - select the “Ethernet Connection” option Moden/Router Method 2: Wi-Fi Connection • Make sure you are in the same room as your wireless router and plug camera into power.
Web Access: After setting up your camera on the mobile phone - you can use your account username and password to access the cameras from any device with an internet browser Log on to the website: http://cloud.serenelifehome.com/ Passwords Should you happen to forget a camera's individual password you can reset it by performing a hardware reset. Just use a pin to press and hold the reset switch for 12 - 15 seconds. The camera will reboot and run through pan and tilt.
Mobile App Layout The main screen is your device list. You will see a thumbnail preview for all cameras added to your account. Use this menu to • Switch between different cameras • Add new devices • Access and change app global settings App Settings You can change your user admin and guest password and check the app software version. Add Device Add your cloud camera to your account through the icon. www.SerenLifeHome.com Alarm Messages Shows which cameras have detected motion.
Camera View Page This page give you access to all camera specific actions and settings • Hold the phone vertically or horizontally to switch between full screen mode • Swipe left and right on the video to reposition the camera • Spread two fingers apart to zoom in Sound Activate to hear your cameras surroundings Image Settings Set color, contrast, image res and more. Microphone Activate to talk through your camera's speaker. Local Video Records the live video direct to phone memory.
Camera Recordings Enter into the interface of "information and video viewing" can see the alarm information and video of storage device (Micro SD or cloud box), users can quickly search the information and video by choose the time or category. Local Shows photos and videos recorded to the phone memory Calendar Icon Skip to a specific date and time.. Records Shows photos and videos stored on the SD memory card. Drag the screen down to load. www.SerenLifeHome.
Device Settings This screen allows you to check and set camera specific settings. If you see the red dot icon - a firmware update is available. Install available firmware updates to ensure the camera features are working as intended. About Check the camera's software version and ID number. Network Can set up the camera Wi-Fi connection Motion and Notification Set the motion detection alarm. Storage Device Connecting Cloud Box for storage Schedule Recording Set the recording schedule start and end time.
Recording Your Camera You can choose 3 options for storing recordings for your camera 1) Local storage This is the most simple method - just point and shoot. This only works while The phone app is open and running and will take up memory on your phone. 2) SD storage Install an SD card and open up a world of possibilities! Choose between scheduled recording, motion detection triggered recording or just let it run! The oldest videos will be overwritten to make room for the newest.
Motion Detection and Notification Settings Explained You can set notification settings separately for any camera in your account. To access the notification settings, select your camera, and go to the settings tap - then scroll down to "motion detection" Slide the slider to enable motion detection You can then choose what actions you would like to occur when your camera detections motion. Recordwill record video to the SD card while the camera detects motion.
If you are finding your camera is alerting you needlessly or failing to alert you if someone is moving, you can adjust the sensitivity for motion detection for the camera. Go to "settings" > "Motion Sensitivity" and adjust the sliders for day and night seperately How to Improve Playback Performance Choppy video? Try the following to ease up the demands for data on your camera...
Just open up the setting here and adjust until you get the desired performance level. Plug your camera into a wired data connection Do some tests before throwing in the towel for using the camera wirelessly But the facts remain - wires are still quicker... How to evaluate your home wireless network Evaluate your wireless network Cameras having trouble with wireless? You may want to consider upgrading your wireless network. 13 www.SerenLifeHome.
Lets do a basic evaluation of your home wireless network. First, we recommend comparing your network speed with your wireless speed. 1. Run a speedtest from a laptop of desktop connected to your router with a wired connection. http://www.speedtest.net/ 2. Compare this value to your wireless network apps like “Speed Test” to see if you have enough available data in the area you would like to set the camera. 3.
It is reccomended that you install updates while on a wired connection to your router. This will ensure loss of bandwith is not an issue during updates To check and install firmware updates 1. Tap the device preview image 2. Look for red dot indicating firmware update available - then enter settings 15 www.SerenLifeHome.
3. Scroll down to "System Settings" 4. Select Upgrade - then confirm 5. Now wait for the upgrade to proceed • It can take 5 - 10 minutes • Do not quit the app or modify the camera hardware www.SerenLifeHome.
6. Once complete - the app will tell you to restart the camera • However it should automatically restart itself • Wait 2-3 minutes for the camera to restart before checking the camera feed or settings 7. Check if any additional updates are available • Sometimes there will be multiple updates available in a row. Repeat the process until no new updates are available Desktop access link: http://cloud.serenelifehome.com/ Other issues? Check our FAQ resources and contact support online! www.SereneLifeHome.
Still having trouble? • Try deleting the camera entry from your account • Hardware rest the camera • Add the camera as a new device SD Card is not recognized by the camera • Check the card is class 10 - 32g or less • Insert the card while the camera is powered down then power up • Try reformatting the card using your computer using "FAT32" • Test multiple SD cards App is crashing - a feature is not working • Check for app updates • Check for camera firmware updates • Contact support with app version, mobile
The “SereneViewer” App: • Free to Download & Easy-to-Use • Gives you Remote Access to Live or Recorded Video • Works with All of Today’s Latest Smartphones & Tablets • Camera Management: Control, View & Add Additional Cameras • Scheduled Recording: Set the Timer for Automatic Start Times • Configurable Picture Adjustment Settings • Android & iOS Support Technical Specs: • Imaging Sensor: 1/3” Color CMOS • Video Resolution: Up to 1536P (2048*1536Pixels) 30FPS • Video File Format MJPEG (H.