TABLE OF CONTENTS: PRODUCT STRUCTURE DIAGRAM 1 SETUP AN ACCOUNT USERNAME 2 ADD CAMERA TO APP 3 CONNECT TO YOUR NETWORK a WEB ACCESS PASSWORDS MOBILE APP LAYOUT CAMERA VIEW PAGE 7 CAMERA RECORDINGS oe 8 DEVICE SETTINGS 9 RECORDING YOUR CAMERA 10 MOTION DETECTION AND NOTIFICATION SETTINGS EXPLAINED n HOW TO IMPROVE PLAYBACK PERFORMANCE 12 DECREASE THE VIDEO STREAM QUALITY HOW TO EVALUATE YOUR HOME WIRELESS NETWORK HOW TO CHECK AND INSTALL FIRMWARE UPDATES -TECHNICAL SPECS 18 TROUBLESHOOTING 19
Product Structure Diagram RILED Lens Photosensitive Sensor Wireless Network Wired network Status Light / Status Light Loudspeaker ) Microphone Micro 5D Card Slot
Don't forget to register your camera with us online to get agree 1 year manufacturer's warranty! Just go to www. SerenelifeHome.com *‘Serene Viewer' APP Installation A. Scan 'Serene Viewer' APP QR code or search to download the app.
Create an account password Click "Sign Up" Note: This will be used to log in toll of the cameras on your accountant an be separate from the camera password sins pr team Add Camera to APP 1. Enter ‘Device List and click Icon at the top of left corner. Then scan the device ID QR code.
Connect to Your Network Choose method 1 or 2 for setup Method 1: Wired Setup -Connect power, Theme cable as above. Wait 50 seconds fort#) indicator on the camera to flash green -After scanning QR code select the “Theme Connection” option Moderateness ELE Method 2: WI-Fi Connection Make sure you are in the same room as your wireless router and plug camera into power.
Web Access: After setting up your camera on the mobile phone you aan use your account amusement and password to access the cameras from any device with an interment browser Log on to the website: thundercloud serenelifehome.com/ Passwords Should you happen to forget a @camera's individual password you an reset it by performing a hardware reset. Just use a pin to press and hold the reset switch for 12 15 seconds. The camera will reboot and run through pan and tit.
Mobile App Layout The main screen is your device list You will see a thumbnail preview for all cameras added to your account. Use this menu to Switch between different cameras Add new devices Access and change app global settings Add Device Add your cloud camera to your account through the icon, ‘App Settings You can change your user admin and guest password and check the app software version. Messages Shows which cameras have detected motion.
Camera View Page This page give you access to all camera specific actions and settings -Hold the phone vertically or horizontally to switch between full screen mode -Swipe left and right on the video to reposition the @mare -Spread two fingers apart to zoom in Camera Settings View the Video Records and alarm messages Click the icon to view the video recording and alarm message. Microphone Activate to talk through your camera's speaker.
Camera Recordings Enter into the interface of "information and video viewing” aan see the alarm information and video of storage device (Micro SD or dud box), users can quickly search the information and video by choose the time or category. Snapshot Shows photos recorded tithe and Si hone memo memory ca Calendar Icon Skip to a specific date Shows videos stored on the SD memory card and local phone memory.
Device Settings This screen allows you to check and set @mare specific settings. If you see the red dot icon a firmware update is available. Install available firmware updates to ensure the camera features are working as intended. About Check the camera's re version and ID number, Can set up the camera WI-Fi connection ice I i Somersetting Cloud Box for Motion and Notification Set the motion detection alarm. Schedule Recording Set the recording schedule start and end time.
Recording Your Camera You an choose 3 options for storing recordings for your camera 1) Local storage This is the most simple method just point and shoat. This only works while The phone app is open and running and will take up memory on your phone. 2) SD storage Install an SD card and open up a world of possibilities! Choose between scheduled recording, motion detection triggered recording or just let it run! The oldest videos will be overwritten to make room for the newest.
Motion Detection and Notification Settings Explained You can set notification settings separately for any camera in your account. To access the notification settings, select your camera, and got the settings tap then scroll down to "motion detection” Hag ’ Bu “ Nat That Lisa i Slide the slider to enable motion detection You an then choose what actions you would like to occur when your camera detection motion. Record will record video to the SD card while the camera detects motion.
If you are finding your camera is alerting you needlessly or failing to alert you if someone is moving, you can adjust the sensitivity for motion detection for the camera, Goth "settings" > "Motion Detection Sensitivity" and adjust the sliders for day and night separately How to Improve Playback Performance Choppy video? Try the following to ease up the demands for data on your camera...
Just open up the setting here and adjust until you get the desired performance level, Plug your camera Into a wired data connection Do some tests before throwing in the towel for using the camera tirelessly But the facts remain wires are still quicker... How to evaluate your home wireless network Evaluate your wireless network Cameras having trouble with wireless? You may want to consider upgrading your wireless network.
Lets doa basic evaluation of your home wireless network. First, would recommend comparing your network speed with your wireless speed. 1) Run a speediest from a laptop of desktop connected to your router with a wired connection.
Iris recommended that you install updates while on a wired connection to your router.
3) Scroll down to "System Settings” 4) Select Upgrade then confirm 5) Now wait for the upgrade to proceed It can take 5 10 minutes Do not quit the app or modify the camera hardware
6) Once complete the app will tell you to restart the camera However it should automatically restart itself Wait 2-3 minutes for the camera to restart before checking the camera feed or settings 7) Check if any additional updates are available -Sometimes there will be multiple updates available in a row. Repeat the process until no new updates are available Desktop access link: httpu/doud serenelifehume.oom/ Other issues? Check our FAQ resources and contact support online! www. SereneLifeHome.
Technical Specs: * Imaging Sensor: 1/4” Color COS * Video Resolution: Up to 1080p (1920 x 1080 Pixels) FPS * Video Mlle Format JPEG (H.264) * Night Vision Distance 327+ ft. { 0.01 LUX) * WI-FI Wireless Network: * Protocols: TCP/IP, UDP/IP, HTTP, CPD, RTFM, MUTE * Theme Network: 10/100Mbps, JR-45 Interface * P2P Technology Plug and Play * Dynamic Code Rate Filtering Sitter Buffer * Maximum Miro SD Card Support Size: 128 GB * Lighting Frequency: 50/60Hz * Video Compression: H.
Troubleshooting Can't connect to WiFi Connect the theme cable and check connection is working Goth "@mare settings" > "network" Check the WiFi status is enabled and "List" displays your home network double check the password.