SLIRX45 Shirt Ironing Machine 1400W Ironing Dummy/Press for Shirts/Blouses & Much More, Dries and Irons Clothes Automatically in one Step
Explanation of the Symbols Danger symbols: These symbols indicate risks of injury (e.g. from electricity or fire) Read through the associated safety instructions carefully and follow them. Protection class II Danger symbols: These symbols indicate risks of injury Read operating instructions before use! Supplementary information Explanation of the Signal Words DANGER Warns of serious injuries and danger to life. WARNING Warns of possible serious injuries and danger to life.
Safety Instructions The device is equipped with safety features. Nevertheless, the device may still present dangers if it is not used as intended. CAUTION: hot surfaces! The motor unit/telescopic rod will become hot during use. You should therefore not touch it during or shortly after use. • This product is not a toy. Keep away from children. • The device must always be switched off and disconnected from the main power when it is not being used and before assembling, disassembling or cleaning the device.
NOTE: Risk of Damage to Material and Property • Never cover up the ventilation slots and do not insert any objects into them. • Lay the power cable in such a way that it does not become squashed or bent and does not come into contact with hot surfaces (also applies to the hot surfaces of the device!). • Never pull or carry the device by the power cable.
Assembly 1. Insert telescopic rod (2) into the recess on the top of the motor unit (4). 2. Place the hanger (1) onto the telescopic rod (2). When you do this, make sure that the slight bend in the hanger (1) points forward. 3. Attach the nylon balloon: • Pull it over the hanger (1). When you do this, make sure that the side with the hole line points forward. • Pull the small elastic cord at the top over the collar section on the hanger (1). • Pull the large elastic cord at the bottom over the motor unit.
3. Pull the garment which is to be pressed over the nylon balloon and the hanger (1) and button up the buttons if necessary. Make sure that: • the collar is fitted over the collar section • the arms of the nylon balloon fit properly in the sleeves of the garment and are not twisted or scrunched up, • all buttons on the garment (including on the sleeves) are button up. 4.
Cleaning and Storage NOTE! • Before cleaning, read the safety instructions in the “Safety Instructions”chapter! • Never immerse the device, or electrical cables in water or other liquids! • Do not use any corrosive or abrasive cleaning agents or cleaning pads to clean the device. These can damage the surface. • Clean the device and the nylon balloon if necessary with a slightly damp cloth and a little mild detergent if required. Then wipe down fully with a dry cloth.
SLIRX45 Shirt Ironing Machine 1400W Ironing Dummy/Press for Shirts/Blouses and Much More, Dries and Irons Clothes Automatically in one Step Features: • Perfect for Shirts, Blouses, Tops, Tees, Sweaters, Jackets and More • Dries and Irons Clothes Automatically in one Step • Built-in Timer • Compact Unit for Easy Storage • Save Money on Dry Cleaning Bills • Dry, Steam and Iron Clothes at the Same Time • Hot Air Tension Technology • Indoor/Household Use Only • Intended to be Used to Dry and Press Delicate Tex
Technical Specs: • 1 pc. Poly Bag for Unit (size: 21.65” x 21.65”) • 1 pc. Poly Bag for Plug (size: 11.81” x 3.94”) • 1 pc. Poly Bag for Shoulder Part (size: 21.65” x 7.87”) • 1 pc. Poly Bag for Sack with zipper (size: 10.83” x 10.83”) • 1 pc. Bubble Bag for 5 pcs. Round Clips (size: 3.54” x 11.81”) • Material: ABS + Nylon • AC Power: 1400W 120V AC-60Hz • Size: Shoulder Part 17.32’’ - inches • Total Size: 16.34” x 6.61” x 40.
