User Manual

www.SereneLifeHome.com 7
After pulling and releasing the trigger,
the temperature reading will be displayed
with a beep when the tone model is on.
If the temperature measurement is below
32°C or 89.6°F, a “Lo” symbol will appear.
If the reading is above 42.9°C or 109.22°F,
a “Hi” symbol will be displayed. Meanwhile,
the buzzer will send out a Di-Di-Di alarm
when the tone model is on. The screen
will change from green to red at the same
time, if the backlight is on. One more test
would be applicable in both conditions.
If the reading is above 37.4°C or 99.32°F
but below 38°C or 100.4°F the screen will
change from green to yellow when the
backlight is on. If the reading is above
38.1°C or 100.4°F the buzzer will send out
a Di-Di-Di alarm when the tone model is
on and the screen will change from green
to red when the backlight is on. In the
“surface temperature” mode, no “Body
temp” icon is show on the screen.
This model can be used to display the true
values of measure results which is either
higher than 42.9°C (109.22°F) or lower
than 32°C (89.6°F). The thermometer will
automatically shut o after 20-seconds
standby.