User Manual

OPERATIONS

Switch on the device

Press the POWER button to turn the unit on and o.

MODES

Auto Programs

There are 4 preset programs (P1-P4). The exact description of the programs can be found in the program table.

Commissioning and Operation

• Insert the plug into the socket. All LED lights up briey once.Then the device in standby mode and only the POWER

lamp lights up.

• Press the POWER button to start Manual mode (SwingUp/Down). The preset time is 10 minutes, the preset speed is 0

(the speed indicator is not lit).

Note: To switch to Auto mode, press the AT button repeatedly to select one of the preset programs (P1-P4). To return

to manual mode, press the MODE button repeatedly to select one of the manual modes.

• In Manual mode press the TIME button repeatedly to adjust the time in the following order:

3 minutes > 6 minutes > 9 minutes > 12 minutes. Press the MODE button repeatedly to select one of the manual modes.

When you change modes, the time is automatically set to 10 minutes.