User Manual

Serengeti-IR
™
Installation, Operation & Service
Combustion Research Corporation
INSTALLER
PLEASE TAKE TIME TO READ AND UNDERSTAND THESE INSTRUCTIONS PRIOR TO ANY
INSTALLATION. Contact your representative or the factory if you have any questions
OWNER
Retain this manual in a safe place to provide your serviceman with information if the situation arises.
TABLE OF CONTENTS
PAGE(S)
Heater Safety & Burner Label Locations 1 & 2
Warning Symbols 3
Standards, Certifications & Codes 3 & 4
Installer Qualifications & Responsibility 4
Assembly – Tube & Reflectors 5 & 6
Suspension Methods 7
Combustion Tube Installation 8
Reflector Mounting 8
Customizing System 8
Seismic Restraint Suspension 9
Burner Connection & Installation 10
Gas Line Installation 11
Flexible Gas Connector Installation 12
Technical Data 13
System Dimensions 14
Clearance To Combustibles 15 & 16
Side Shield Installation 17
Combustion Air Supply 18 & 19
Venting 20 -22
Electrical Information 23
Burner Internal Wiring Schematic 24
Thermostat Wiring 25
System Startup 26 & 27
Sequence Of Operation 27
Maintenance & Service 27 – 31
Trouble Shooting Flow Chart 32 & 33
Burner Parts List 34 & 35
Accessories & Optional Equipment 36 – 38
Warranty Statement and Terms &d Conditions 39 & 40
Sample Clearance To Combustible Warning Sign 43
Serengeti-IR
™
heating systems DO NOT qualify for use in explosion proof installations.
Heaters SHALL NOT be used in living/sleeping areas.
©2016 COMBUSTION RESEARCH CORPORATION, INC.
All rights reserved. No part of this work covered by the copyrights hereon in may be reproduced or copied in any form or by any means -
graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without written
permission of COMBUSTION RESEARCH CORPORATION, Inc.