Specifications

Control 36
Regular Checks
Check of Operating Mode
In the event of an alarm, The background light of LCD will flash and an alarm message will be displayed.
Check
the alarm indicator r egularly to make sur e that the heat pump works pr o perly . Y ou would not always notice if
ther e is something wrong, as the auxiliary heater would star t automatically (pr ovided, of course, operating mode
AUTO was selected). For mor e information, please r efer to the chapter ALARM MESSAGES on p. 38.
Checking the Brine Level in the Brine system
The Brine system must be filled with the corr ect volume of brine. Otherwise the heat pump
unit risks being damaged.
Brine system liquid (brine) must be added if the brine level gets so low that it is no longer visible in the expansion
vessel.
During the first month of operation the brine level might sink a little, which is quite normal. The brine level
may also vary a bit, depending on the temperatur e of the heat sour ce. Under no cir cumstances, however , shall the
brine level be allowed to sink so much that it is no longer visible in the expansion vessel.
Call your installation contractor for r efilling of Brine system liquid.
Level is too low Level is correct
ALARM
AND.HEAT OVER