INSTRUCTION MANUAL & REFERENCE GUIDE
INTRODUCTION Serpent developed the S100 LTR model car for demanding racers in the highly competitive electric 1/10th scale pan car market, which like all our previous cars, has been designed to win straight from the box.
USING THE MANUAL Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in which the parts should be assembled. The lines and symbols are described below.
CA Glue To prevent the risk of the carbon fibre splitting in the event of a crash you should apply CA Glue STEP around the chassis’ edge and the power pod plate external and internal edge as shown in red below. 1 KIT FRONT ASSEMBLY STEP Nylock Nut M3 Nylock Nut M3 2 Bag 1 M3x12 M3x12 Nylock Nut M2.2 STEP 3 M2.2x12 1 Nylock Nut M2.2 Page 4 1 2 M2.
STEP 1 4 0.
.1 STEP 6 Bag 2 3.2 mm 6.2 3 3 M3x3 M3x3 1 1 2 Front suspension brackets up INSIDE OUTSIDE 2 Default setup STEP 7 7.1 Nylock Nut M3 M3x6 Page 6 Note orientation of the king pin insert. Default ackermann position in the steering block lever. Steering block King pin inserts King pin angle adjustable from 0 to 4 degrees.
.2 R2.3 1 2 3x5x0.3 3x5x1 3x5x2 3 4 R2.3 REAR ASSEMBLY STEP Nylock Nut M3 8 Bag 3 Note the correct ball type to use here 1 2 NOTE Do not overtighten to ensure free rotation of the pivot ball.
STEP 9 M3x6 M3x6 M3x6 M3x6 STEP 10 M3x6 M3x6 Page 8
M2x6 STEP 11 2 2 1 M2x6 1 2 M2x6 1 2 M2x6 1 Note the correct ball type to use here M3x5 3 NOTE: The links should move free without play. Adjust movement and play with these screws. 3 M3x5 3 M3x5 3 M3x5 4 STEP 12 3 4 M2.5x5 3 Bag Note the correct ball type to use here M2.5x5 4 M3x5 M3x3 1 M3x5 2 2.
STEP A) OUTSIDE SIDE SPRING CONFIGURATION (DEFAULT) M3x6 13A M3x10 M3x6 1 2 M3x10 1 2 STEP B) INSIDE SIDE SPRING CONFIGURATION 13B M3x6 M3x16 1 2 M3x16 1 2 STEP 14 3x5x0.
STEP 15 3 1 M3x6 3 M3x5 M3x6 3x6x0.5 M3x6 2 16.1 STEP 16 M3x10 Apply the silicone oil on the inner tube, see CST value in the setup sheet 16.
BALL DIFF ASSEMBLY Note spring washer orientation STEP 17 1/4x3/8 Apply silicone grease Bag 5 Note thrust bearing adapter orientation 1/4x3/8 2 1 Note insert orientation. For insert number see default setup sheet. STEP M3X8 18 6.5x8x0.25 M3X8 1/4x3/8 Flanged 6.5x8x0.25 1/4x3/8 Flanged Rear ride height inserts The rear ride height is adjustable in steps of 0.5mm increments using different rear axle bearing adapters. The ride height decreases if the axle is placed higher.
SERVO AND BATTERY ASSEMBLY NOTE: Serpent S100 LTR is designed to create two different battery/servo configurations: A) Detail view shorty battery and laydown servo configuration (default) B) Detail view standard battery and standing servo configuration. Below you can see a detail view of both configurations. Please follow the right steps for the choosen configuration: A or B A) Shorty battery and laydown servo configuration (default) B) Standard battery and standing servo configuration.
20.1 STEP 20A 31.8 mm 20.
STEP 22A Check how many teeth your servo spline has (23, 24 or 25) and use the right inserts. M3X5 M3X8 23.1 STEP 23A 9mm 23.2 STEP NOTE Use glass-tape (not included) to fix the battery to the chassis. NOT INCLUDED 24A M2.5X5 M2.5X5 M2.5X5 Page 15 M2.
B) Standard battery and standing servo configuration. Futaba mini servo STEP 19B std LOW PROFILE SERVO M3x8 NOT INCLUDED NOT INCLUDED M3x8 3x6x0.5 M3x5 3x6x0.5 M3x5 JR SERVO NOT INCLUDED M3x6 3x6x0.5 Futaba mini servo STEP 20B M3x8 std LOW PROFILE SERVO M3x6 Flanged LEFT M3x6 Flanged RIGHT CENTERED LEFT JR SERVO NOTE: There are three different servo mounts (FR view).
22.1 STEP 22B 31.8 mm 22.2 STEP NOTE Use glass-tape (not included) to fix the battery to the chassis. NOT INCLUDED 23B M2.5X5 M2.5X5 M2.5X5 M2.
SHOCK ASSEMBLY 1 25.2 25.1 STEP 2 25 3 Use some silicone oil during assembly NOTE: For the correct piston check the set-up sheet. Bag 7 25.4 1 25.5 2 M3X10 M3X3 25.7 25.6 Close the shock slowly. Important: do not crossthread! Oil will overflow through the built-in bleed channel. Filling: Fill the shock body with shock absorber oil. Check the oil CST value in the setup sheet. 25.
STEP 27 STEP 28 NOT INCLUDED Tip: Use double sided tape to mount the ESC and RX to the chassisplate. NOT INCLUDED M3X5 STEP 29 Pinion is NOT INCLUDED in the kit.
FINAL ASSEMBLY STEP Nylock nut M3 30 M3X10 M3X10 STEP 31 M3X10 M3X10 M3X10 M3X10 Page 20
STEP 32 STEP 33 Body, wheels and tyres are NOT included 1/8X5/16 Flanged M3X8 Nylock Nut Low M3 Page 21
REFERENCE GUIDE Page 25
FRONT ASSEMBLY 110116 411049 411049 411320 411142 401058 411230 411321 110104 411081 411229 411059 110104 411163 110408 411042 401042 401043 411323 401025 411322 411086 110402 411085 110160 411042 411033 411064 411218 411219 411220 411084 411181 110406 411034 110108 Front spring 22lbs S120L (2) Front spring 18lbs S120L (2) Front spring 26lbs S120L (2) 411163 411230 411142 411324 110402 411228 110104 411227 411373 110127 Please click here to check all the Optional Parts BALL DIFF AS
REAR ASSEMBLY 411187 411188 110415 110122 110128 110122 411331 110122 411207 411061 110122 110154 411238 401025 411259 411207 401025 110122 411224 411061 411074 411072 411279 411325 110128 110166 411328 110154 401025 110402 411072 411201 110122 411202 411074 411224 411329 411326 411199 411048 110206 110128 411199 411326 110114 110408 110116 110122 411327 411199 110157 110122 110104 110122 110157 411208 411209 411210 411211 411212 411213 Side Side Side Side Side Side spring sp
STEERING ASSEMBLY A 411346 411308 1070 110172 411206 411206 804322 110128 401356 411236 401025 411206 110104 411206 110108 401025 1312 411335 401025 110108 110128 1312 411374 110166 110166 110122 Please click here to check all the Optional Parts STEERING ASSEMBLY B 411308 110172 1070 411277 110124 110415 401025 110128 411206 411235 110166 110166 Page 28 Please click here to check all the Optional Parts 110122 110172 1070 411236 411206
FINAL ASSEMBLY 411040 1606 411239 411040 401413 401025 411040 401043 1667 110109 411239 411243 110109 500360 411040 411350 411291 110104 411291 1667 411243 411242 411241 110109 411240 110129 110402 110122 411061 110100 411077 110100 411077 110402 Please click here to check all the Optional Parts Page 29
TEAM SERPENT NETWORK S100 LTR SPARE PARTS S100 LTR OPTIONAL PARTS SERPENT TOOLS SERPENT MERCHANDISING website and blog Page 30 social media
S100 LTR version 1 www.serpent.com - info@serpent.