Dragon-RC DTS-3 Transmitter - Manual

INSTALL THE BATTERIES
1) Remove the battery cover carefully.
2) Place 4 x AA size batteries inside, check the right + and - position.
Please replace or re-charge batteries when
the power indicator blinks or buzzer beeps.
TRANSMITTER ADJUSTMENT
A. Throttle trigger
1) Push the trigger forward to slow down
or brake.
2) Pull the trigger backward to accelerate.
B. STEERING WHEEL
Neutral - Left - Right
L
E
F
T
N
E
U
T
R
A
L
R
I
G
H
T
Turn the steering wheel to the left or
right to let the car turn left or right.
Steering Trim:
If the front wheels don’t allign straight,
use the steering trim to adjust.
Neutral
Brake
Slow down
Forward
Speed up
ATTENTION
Keep the transmitter and receiver 40cm apart when operating.
Warning: The (binding) pin header cannot connect to the power source.
Use the REV switches to reverse the steering or throttle operating direction
TRIMMING
Throttle Trim: Trim the throttle servo slightly when the trigger is at the neutral position.
Steering Trim: If the front wheels do not align straight, use the steering trim to adjust.