DragonRC 2.4GHz Transmitter Manual

2.6 S TRIM
Function 5.0V
1: EPA
2: D/R
3: S-TRIM
4: REV
5: ST CURV
S-TRIM 5.0V
ST: 0
TH: 0
ST D/R 5.0V
POS 0: 100%
POS 1: 70%
ST: D/R
- D/R is used to change the action range of steering
servo when turning the steering wheel. Increasing D/R
will make the steering wheel action more sensitive.
- D/R adjusting value range: 0~120%, POS 0 default value
is 100%, POS 1 default value is 70%.
- Press the ST.D/R dial to select POS 0 or POS 1, and
the value will display in the LCD when it is on the main
screen.
1. Press ‘Roller’ to see FUNCTION MENU.
2. Use the roller to choose, and press ‘Roller’ to enter
adjusting interface.
3. Rotate the roller to increase and decrease value.
4. Press ‘Back’ again to return to save your setting and
leave interface, and back to the function menu
interface.
- Use this function to adjust the neutral position of the
steering and throttle servos.
- SUBTRIM adjusting value range: -100-100 Default is 0.
1. Press ‘Roller’ to see FUNCTION MENU.
2. Use the roller to choose, and press ‘Roller’
to enter adjusting interface.
3. Use the roller to increase and decrease value.
S-TRIMSUB TRIMSUBTRIM.
4. Press ’Back’ again to return to save your setting and
leave interface, and back to the function menu
interface.
TERMS: ST-STEERING, TH-THROTTLE
2.5 D/R
10