DragonRC 2.4GHz Transmitter Manual

13
TH-CURV 10.2V TH-CURV 10.2V TH-CURV 10.2V
M: VRT
P: 50
R: 50
BR: 0
M: VRT
P: 50
R: 25
BR: 0
M: VRT
P: 50
R: 25
BR: 45
Neutral
Neutral
Neutral
TH.POS
TH.POS
Forward side Forward side Quick backward (BR:0~100)
TH-CURV 10.2V TH-CURV 10.2V TH-CURV 10.2V
M: CUR
1 2 3
R: 25
BR: 0
M: CUR
1 2 3
R: 88
BR: 0
M: CUR
1 2 3
R: 88
BR: 0
Adjustment method for VTR curve.
- Select VTR at setup item ‘M’.
- Select setup item ‘R’ and make the following adjustments:
1. Forward side adjustment: Use the roller to change to the desired rate value.
A positive VTR value increases the sensitivity around neutral position while a negative
value decreases its sensitivity.
2. Curve switching point adjustment: When you want to change the curve switching point
relative to the throttle trigger, select the setting item ‘P’ by pressing the roller, and use
the roller to move to the point you want to set.
3. When ending setting, return to the initial screen by pressing ‘Back’.
Adjustment method for CUR curve.
- Select CUR at setup item’ M’.
- Select setup item ‘R’ and make the following adjustments:
1. Curve setup:
- Select the setting item ‘1’: (1st point), by pressing the roller and use the roller to set
the 1st point.
- Set the throttle curve by sequentially setting’ 2’: (2nd point) ~ ‘3’: (3th point).
2. When ending setting, return to the initial screen by pressing ‘back’.
TERMS: M-MODE, R-RATE, BR-BRAKE, VTR-VERTICAL, CUR-CURVES,
P-TRIGGER POS, 1~3-Curves point 1~3.