DragonRC 2.4GHz Transmitter Manual

17
2.12 THROTTLE SPEED
- Sudden throttle trigger operation on a slippery road only causes the wheels to spin and
the vehicle cannot accelerate smoothly. Setting the throttle speed function reduces
wasteful battery consumption while at the same time permitting smooth, enjoyable
operation.
- Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if
the throttle trigger is operated more than necessary. This delay function is not performed
when the throttle trigger is returned and at brake operation.
- Adjustment:
1. Use the roller select the TH button.
2. Press the roller to select SPD. FL item.
3. Use the roller to change the value.
4. Press ‘Back’ again to return to return to the function menu.
Throttle without speed Throttle speed
TERMS:
SPD.FL- SPEED FORWARD DELAY. Range:0~100%, default:0.
SPD.Bk- SPEED BACKWARD DELAY.Range:0~100%, default:0.
Throttle without ATS Throttle with ATS
FUNCTION 10.2V ATS 10.2V ATS 10.2V
9: Speed
10. ATS
11. BR-MIX
12. MIX
TRI: 1%
POS: 0%
DLY: 0%
MOD: INH
TRI: 1%
POS: 0%
DLY: 0%
MOD: ACT
2.13 ATS
ATS Automatic Start
When the throttle trigger is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly. When
the Start function is activated, merely operating the throttle trigger slowly causes
the throttle servo to automatically switch from the set throttle position to a preset point so
that the tires do no loose their grip and the car accelerates smoothly.