DragonRC 2.4GHz Transmitter Manual

- When the throttle trigger is moved to the preset trigger position (TRI), the throttle
servo moves to the preset position (POS).
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the rst throttle trigger operation at starting.
This function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically
deactivated and the set returns to normal throttle trigger operation.
1. Press ‘Roller’ to see FUNCTION MENU.
2. Use the roller to select the ATS function and press ENTER.
3. Press ‘Roller’ to select TRI item. Use roller to change the value.Range:0%~+100%.
4. Press ‘Roller’ to select POS item. Use roller to change the value. Range: 0%~100%.
5. Press ‘Roller’ to select DLY item. Use roller to change the value. Range: 0~100.
6. Press ‘Roller’ to select MOD item. Use roller to change INH or RDY.
7. Press ‘Back’ again to save and return to FUNCTION MENU,
press the back again to return to the Main Screen.
TERMS:
TRI - Throttle trigger position.
POS - Preset position
DLY - ATS Delay time
MOD - ATS Ready setting
2.14 BK-MIX
BK-MIX 10.2V
BK-MIX 10.2V
RATE: 100%
EN: ON OFF
RATE: 80%
EN: ON OFF
FUNCTION 10.2V
9: Speed
10. ATS
11. BK-MIX
12. MIX
BK-MIX - BRAKE MIXING
When using a secondary brake system set the BRAKE MIX value to a percentage of the
Throttle Brake.
This mixing uses the 2nd channel to control the rear brakes and the 3rd channel to
control the front brakes. This function can be used in conjunction with
the TH TRIM and TH.
EPA to ne tune the power and balance of the overall braking system.
1. Press ‘Roller’ to see FUNCTION MENU
2. Use the roller Keys to select the BR-MIX function and press the roller to enter.
3. Press the roller to select a item.
4. Use the roller to change the value.
5. Press ‘Back’ again to return to save and return to FUNCTION MENU,
press the back again to return to the Main Screen.
TERMS:
RATE - the rate of brake between 3rd channel and 2nd channel. Default value: 0-120%.
EN - the start or close switch of this function. Select ‘ON’ to start the function,
and ‘OFF’ to close the function
18