DragonRC 2.4GHz Transmitter Manual

2.19 SOUND

2.20 RESET

2.21 MODEL RESET

FUNCTION 10.2V

16: SOUND

17: RESET

18: M-RES

19: TIMER

16: SOUND

17: RESET

18: M-RES

19: TIMER

NEUTRAL 10.2V

SYSTEM

RESET DATA?

NO YES

READY

RESET DATA?

NO YES

RESET SYSTEM?

SOUND 10.2V

SOUND: INH

SOUND: ACT

This function can open or close the buzzer sounding.

1. Press ‘Roller’ to see FUNCTION MENU.

2. Use the roller to select the SOUND function and press the roller to enter.

3. Use the roller to select INH or ACT.

4. Press ‘Back’ again to return to save and return to FUNCTION MENU,

press the back again to return to the Main Screen.

- All the setting in the system will be reset to the default values

by this reset function. It takes about 30 seconds.

1. Press ‘Roller’ to see FUNCTION MENU.

2. Use the roller to select the RESET function and press the roller

to enter.

3. Press ‘Roller’ to reset the memory

4. Press ‘Back’ again to return to save and return to FUNCTION

MENU, press the back again to return to the Main Screen.

This function will reset the data of the current model memory to default values.

1. Press ‘Roller’ to see FUNCTION MENU.

2. Use the roller to select the M-RES function and press the roller to enter.

3. Use the roller to select YES

4. Press the roller to reset the data

5. Press ‘Back’ again to return to save and return to FUNCTION MENU,

press the backagain to return to the Main Screen.