DragonRC 2.4GHz Transmitter Manual

2.22 MODEL RESET
FUNCTION 10.2V
16: SOUND
17: RESET
18: M-RES
19: TIMER
TIMER 10.2V
TIMER 10.2V
MODE: INH
T: 0 m 0 s
MODE: DN-T
T: 3 m 2 s
Use the timer by selecting one of the two timers UP TIMER and DOWN TIMER, and if
the MODE is INH, It will close the TIMER Function.
1. Press ‘Roller’ to see FUNCTION MENU.
2. Use the roller to select the TIMER function and press the roller to enter.
3. Press the roller to select a item.
4. Use the roller to change the value
5. Press ‘Back’ again to return to save and return to FUNCTION MENU,
press the back again to return to the Main Screen.
UP TIMER function
- Press ‘Roller’ to select the MODE. Use the roller to select UP-T. (UP TIMER).
- The UP TIMER can be used to count the time from 0 minute 0 second to the stop time.
The stop time is set form from 0 minute 0 second to 99 minute 30 second.
- The rst start operation will be linked to the throttle trigger.
- The passage of time is announced by sounding of a buzzer each minute after starting.
- The buzzer will sound ‘B-B-B…’ when the timer is up to the stop time.
DOWN TIMER function
- Press ‘Roller’ to select the MODE. Use the roller to select DN-T. (DOWN TIMER).
- The DOWN TIMER can be used to count the time from preset time 0 minute 0 second.
The preset time is set form 0 minute 0 second to 99 minute 30 second.
- The rst start operation will be linked to the throttle trigger.
- The passage of time is announced by sounding of a buzzer each minute after starting.
- The buzzer will sound ‘B-B-B…’ when the timer is down to the 0 minute 0 second.
22