/10 scale Ready To Race electro Buggy 2WD INSTRUCTION MANUAL & REFERENCE GUIDE
powered by Introduction Thank you very much for buying this Serpent rc car. You are now member of a large following of Serpent fans worldwide. This Serpent car will bring you many hours and weekends of racing excitement. Serpent started as rc racing company in 1980, and has developed many modelcars since. This wealth of experience and know how is used in our todays cars and that shows! The Serpent Spyder series of cars is the best entry in the world of rc racing.
Read this first ●● This is a highly technical hobby product, intended to be used in a safe racing environment. This car is capable of speeds in excess of 70 km/h or 50mph. ●● Please follow these guidelines when building and operating this model. ●● Parental guidance is required when the builder/user ●● of this car is under 16. ●● Follow the building instructions. If in doubt, contact your dealer or importer. ●● Be sure to use the proper tools when assembling the car.
Equipment Included with your model: ●● ●● ●● ●● ●● ●● ●● Required for your model ●● Multi Charger; to charge transmitter battery and car battery ●● Battery pack 2-S Lipo ●● Battery AA x 4 to operate the transmitter ●● Tools: selection of allen tools and screw- drivers ●● Hobby knife ●● Camber gauge Page 4 Serpent modelcar, factory assembled and set-up Dragon-RC DTS-2 transmitter (as shown or similar) Dragon-RC DESC speedcontroller Dragon-RC brushless motor Dragon-RC racing tyres, pre-mounts Dragon-Rc dig
Model specs/overview Front wishbone Steeringblock Front camber link Steering servo Front bodymount Shocktower front Race-tyres Steering link Shockabsorbers Speedcontroller Receiver Chassis Battery cover Transmission Bodymount rear Differental Rear wishbone Brushless motor Rear camber link Shocktower rear Shocks rear Page 5 * Rear wing hidden
Basic tuning ●● Springs: by using a softer spring you will have more sag, more chassis roll/ lean, more dive and a less responsive car this might be better on low-grip surfaces; by using a harder spring you have less sag, less body lean, less dive and a more responsive car. What to apply depends on driving style and griplevel surface. This is more suitable on high-grip surfaces.
Maintenance ●● Shockabsorbers Check for smooth operation of the shockabsorbers, and check for airbubbles by pushing the shock up and down fast after removal of the spring. Clean the shockabsorbers as needed and refill with fresh 100% pure silicone oil as needed. ●● Tyres Replace tyres if case worn or damaged, and clean the surface in case dirty to obtain better grip. Shockabsorbers Tyres ●● Wheel-axles and driveshafts Remove the wheels, and check the wheel-axles, driveshafts and pins.
Page 8 500110 500110 500369 500121 500369 500133 500367 500121 110124 500367 500120 500111 110112 110402 110415 110415 110112 500369 500369 500133 110104 500138 110109 110159 500368 110117 210004 500119 500118 500264 EXPLODED VIEWS WITH PART NUMBERS FRONT ASSEMBLY-1
Page 9 500128 500163 500364 110184 500144 110109 110116 500113 500368 500362 110184 110140 110153 500132 500145 500367 500138 110112 500116 500366 500162 500115 110164 500366 500116 110112 500138 1315 500155 500116 500368 500117 110109 FRONT ASSEMBLY-2
GEAR-DIFF EXPLODED VIEW 500246 500247 500246 110220 500253 500246 110188 500248 500249 500249 500290 500257 500253 500290 500246 500248 500254 110220 110153 SHOCKS ASSEMBLY 500363 500372 500183 500183 500370 Front 500371 Rear 500178 500185 500177 500185 110450 500136 SHOCK SPRINGS 500222 500223 500224 500225 500226 500227 500228 500229 500230 500231 500232 500233 500234 500235 500354 500355 500356 500357 500358 500359 Page 10 Shock spring silver 2.
Page 11 211004 110185 500268 110126 1315 500124 500353 1315 500123 500344 1315 1344 500154 500192 500124 500123 1344 110127 500343 110401 See parts list 500268 110152 500352 110405 500352 500213 500214 500215 500216 500217 500218 500219 500220 500221 110130 500127 Spur gear 70T SRX2 Spur gear 72T SRX2 Spur gear 76T SRX2 Spur gear 78T SRX2 Spur gear 80T SRX2 Spur gear 82T SRX2 Spur gear 84T SRX2 Spur gear 86T SRX2 Spur gear 88T SRX2 SPURGEAR TRANSMISSION ASSEMBLY
Page 12 500267 110111 110184 110141 401381 110127 110122 500270 500143 500265 1344 500190 500387 500385 500271 401381 110111 500384 110125 110127 500266 500368 110111 110109 500134 500114 500135 500156 500162 110208 500144 110153 500368 500138 110100 500161 411533 110208 1340 500114 500272 REAR ASSEMBLY
Page 13 500152 500137 170337 110140 211008 210011 214017 NOT INCLUDED 1606 110187 500360 500386 500373 110452 500152 500137 214018 110146 500126 500189 500126 110127 FINAL ASSEMBLY
Optionals and Merchandising Part no Description RADIO INSTALLATION / BATTERY 500165 Battery plate nut (4) SRX2 500278 Batteryplate carbon SRX2 MM 500279 Battery holders (4) SRX2 MM 500280 Battery plate foam SRX2 MM 500284 Battery case inserts foam (3) SRX2 MM SERVO SAVER AND STEERING 500147 Pivotball shim conical (10) SRX2 500149 Pivotball with shaft med (5) SRX2 500197 Servomount alu (2) SRX2 500236 Steeringrack alu (3) SRX2 500287 Steering arm nr 1 brass L+R 500288 Steering arm nr 2 bra
500219 Spur gear 84T SRX2 500220 Spur gear 86T SRX2 500221 Spur gear 88T SRX2 PINIONS 120156 Motor-pinion alu hard 48P / 18T 120157 Motor-pinion alu hard 48P / 19T 120158 Motor-pinion alu hard 48P / 20T 120159 Motor-pinion alu hard 48P / 21T 120160 Motor-pinion alu hard 48P / 22T 120161 Motor-pinion alu hard 48P / 23T 120162 Motor-pinion alu hard 48P / 24T 120163 Motor-pinion alu hard 48P / 25T 120164 Motor-pinion alu hard 48P / 26T 120165 Motor-pinion alu hard 48P / 27T 120166 Mo
500006 Serpent Spyder Buggy SRX-2 MM 2wd 1/10 RTR www.serpent.com - info@serpent.
