Owner Manual

Step 1

Insert Metal Legs (A) into the Base (B) and secure by 20mm

Small Screws (J). Tighten all the screws. Then cover the Base

Cover (C) to Base (B) as shown.

Warning: Fully hand-tighten all 10 bolts at each leg/hub

connection. Be careful not to overtighten or strip bolts. Do not

use power tools. If you experience a problem with the leg

attachment or are unable to fully tighten any of the bolts,

stop. Do not use the base. Contact Customer Service for

assistance. All bolts should be checked and re-tightened

every 90 days.