Back In Motion™Chair Silla Back In Motion™ Assembly Instructions Instrucciones de Ensamblaje Model/Modelo: 44186
About the Back In Motion: While seated, the seat and lumbar are fixed together on a tilting axis that allows you to rotate your pelvis while flexing the muscles of the core. It is designed to allow you to articulate the spine and perform pelvic tilt exercises. *Note: Before placing your full weight onto the chair, ensure you are fully positioned against the back cushion (Z) and not sitting on the front edge of the seat, as the front edge is designed to tilt forward.
Parts / Partes Casters Ruedas Quantity/cantidad: 5 Left Arm Brazo Izquierdo Quantity/cantidad: 1 Star Base Base en forma de estrella Quantity/cantidad: 1 Gas Lift with Telescoping Cover Elevador neumático y cubierta telescópica Seat Plate Mecanismo del asiento Right Arm Brazo Derecho Seat Cushion Cojín del asiento Lumbar Cushion Cojín del Lumbar Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Chair Assembly Instructions Carefully unpack
Back Cushion Cojín del respaldo Quantity/cantidad: 1 1” Small Screws Tornillos pequeños de 25mm Quantity/cantidad: 15 1” Big Screws Tornillos grandes de 25mm Quantity/cantidad: 2 1-1/4” Big Screws Tornillos grandes de 32mm Quantity/cantidad: 6 Allen Key Llave allen Quantity/cantidad: 1 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B).
Step 3 Align the Lumbar Cushion (G) with the Seat Cushion (F) by positioning the Lumbar Cushion (G) between the Seat Cushion (F) and the back support plate, attach by using 1” Small Screws (I) with the Allen Key (L) as shown. *Note: Tighten the screws completely. Step 4 Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with the FRONT of seat plate facing the FRONT of seat cushion).
FRONT R L FRON T Step 5 Align Handles (D1 & D2) of Seat Plate (D) over pre-drilled holes on the left and right on the underside of Seat Cushion (F), attach the Handles (D1 & D2) to both sides of Seat Cushion (F) by using 1” Small Screws (I) with the Allen Key (L). *Note: Tighten the screws completely. Fix the cable for the seat plate into the plastic clips attached to the bottom of the seat cushion.
FRONT FRONT FRONT R FRONT L Step 7 Attach the Back Cushion (H) to the Seat Cushion (F) using 1-1/4” Big Screws (K) with the Allen Key (L) as shown. *Note: Hand tighten all 4 screws (K) in back support plate. Once all 4 screws (K) are inserted, tighten securely using Allen Key (L). Step 8 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D).
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position.
Function Instruction - 3 To Operate Tilt Lockout: While seated, reach under the left side of the chair to find the handle. Push down the handle and lean back to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and pull the handle to the up position. Instrucciones de Funcionamiento - 3 Para operar el seguro de la inclinación: Cuando esté sentado, busque la palanca debajo del costado izquierdo de la silla.
Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así demostrado por el recibo original. Esta garantía no le aplica a muebles usados comprados “como tales”.