Instructions
1. Safety instructions
1.1. General
Read the operating instructions completely and carefully before use.
It is an integral part of the product and contains important information on handling, use and disposal.
Keep this document for future reference or for distribution of the product.
• 1.2 Notes on safety
• Only use the product for its intended purpose.
• Not suitable for children. The product is not a toy!
• Do not open the housing. Do not change or modify the product, product parts and accessories.
• Do not short-circuit connections and circuits.
• Do not use the name tag in extremely cold, hot, humid or dusty areas. Also, do not expose it to direct sunlight. Protect the
product from open fire. There is a risk of explosion!
1.3 Battery hazards
• The battery used to power the LED Name Tag is not replaceable.
• Improper use may damage and leak the battery.
• Leave leaking, deformed or corroded cells in the product and dispose of them using suitable protective devices.
1.4. Magnetism
• The product contains magnetic materials.
• Consult a physician before use for compatibility with implanted medical devices.
• Keep a minimum distance of 20cm from medical equipment.
• Do not store and/or operate near bank cards.
1.5. Warranty and Liability
• Do not change or modify the product and its accessories.
• The manufacturer is not liable for personal injury or damage to property resulting from improper installation, operation or
maintenance.
• Any use other than that described in this operating manual is not permitted and will result in loss of warranty and exclusion
of liability.
• We reserve the right to make misprints and changes to the product, packaging or instructions.
2. Description and function
The Sertronics LED Name Tag can be programmed via PC with a name or an individual message. With the integrated
magnet or pin, the name tag can be attached to a T-shirt, for example.!
!
Technical data
• Number of LEDs: Horizontal: 44 / Vertical: 11
• LED distance: 1,93mm
• Memory capacity: approx. 750 characters in 8 memory banks
• Supported characters: All common languages
• different display modes (fixed, ticker, snow effect, laser, flashing...)
• 8 different speed levels for display modes
• 4 different brightness levels (25%, 50%, 75%, 100%)
• Control via 2 buttons on the rear panel
• Power button for switching on/off
• Message Button: short keystroke: toggle the memory banks / long keystroke: adjust the brightness
• integrated battery: 3,7V / 200mAh
• Charging time: approx. 2 hours
• Running time per charge: 25% Brightness: approx. 24 hours / 100% Brightness: approx. 12 hours
• Programming and charging via Micro USB Type B socket
• Integrated holding option via magnet or pin
• Dimensions: Display: 85 x 23 mm / Complete: 93 x 30 x 6 mm
• Weight: 17g
3. Scope of delivery
LED Name Tag, Micro USB Data and Charging Cable, Software CD, User Manual
User manual
LED Name Tag, 11x44 Pixel