Specifications

Shutdown
The Shutdown section offers access to all Remote Shutdown configuration options. This section is
available to administrative level users only. For additional information and configuration requirements,
see the Remote Shutdown section in this manual.
Outlets
Enabling or disabling Remote Shutdown support:
Select or deselect outlets to enable/disable Remote Shutdown support for in the Shutdown/Delay field
and click Apply.
Setting the Remote Shutdown delay:
Enter the shutdown delay (in seconds) in the outlet Shutdown/Delay field and click Apply.
Editing the target server’s Hostname/IP address:
In the outlet Hostname/IP field, enter an IP address or Hostname and click Apply.
Enabling or disabling shutdown script support:
Select or deselect outlet to enable/disable shutdown script support for in the Script/Delay column and
click Apply.
Setting the shutdown script delay:
Enter the shutdown delay (in minutes) in the outlet Script/Delay field and click Apply.
Configuration
The Configuration section offers access to all unit configuration options. This section is available to
administrative level users only.
System
The System configuration page is used for reference of system information such as Ethernet NIC Serial
Number, Ethernet MAC address and system firmware and hardware revisions as well as assignment and
maintenance of other system wide configurations.
For descriptive names, up to 24 alphanumeric and other typed characters (ASCII 33-126 decimal) are
allowed; spaces are not allowed.
NOTE: Spaces can be used for the location description only.
Creating a pre-login banner:
Click the Login Banner link. On the subsequent Login Banner page, type pre-login banner text and
click Apply.
NOTE: The pre-login banner can be up to 2069 characters in length and is displayed prior to the login prompt. If left
blank, a system banner will not be displayed prior to the login prompt.
The Login Banner displays the following Characters Remaining box to show you in real-time as you type
how many of the 2069 maximum characters are still available for you to complete your banner. The box
adjusts dynamically as you type or delete characters.
If you reach the maximum 2069 characters, the box displays “-1”. To clear your entry and start over, click
Cancel.
Creating a descriptive system location name:
Enter a descriptive name and click Apply.
22  Operations
Installation and Operations Manual