Specifications

Operations  29
Installation and Operations Manual
Towers
The Towers configuration page is used for assignment and/or editing of:
 Descriptive names
 Serial and Model numbers
 Operation voltage types
NOTE: If set at the factory, you cannot edit the serial number, model number, and voltage type.
Creating a descriptive tower name:
In the Tower Name field, enter a descriptive name and click Apply.
Setting the tower serial number:
In the Serial Number field, enter the serial number of the unit and click Apply.
Setting the tower model number:
In the Model Number field, enter the model number of the unit and click Apply.
Setting the operational AC or DC voltage type:
From the AC/DC drop-down menu, select AC or DC, and click Apply.
Setting the operational AC voltage type:
From the 3-Phase drop-down menu, select yes or no, and click Apply.
Input Feeds
The Input Feeds configuration page is used for assignment and/or editing of input feed descriptive
names, operational voltage and maximum load capacity.
Creating a descriptive input feed name:
In the Input Feed Name field, enter a descriptive name and click Apply.
Setting the infeed operational voltage:
In the Input Feed Voltage field, enter a value from 0 to 480 and click Apply.
NOTE: If Smart Load-Shedding has been activated and UPS voltage polling configured for an infeed, the polled voltage
value will be used for all power calculations.
Setting the infeed maximum load capacity:
In the Input Feed Load Capacity field, enter a value from 1 to 255 and click Apply.
UPS
The UPS Configuration page is used for adding a new UPS device and configuring the UPS devices
connected to PT22 units.
To add a new UPS:
Select the UPS manufacturer type from the Type drop-down list, type an IP address (or hostname) for the
UPS, and click Apply.
To edit the UPS type:
Under the Action heading, click the Edit link for the UPS to be configured. The Configuration UPS
page reformats to an edit page where UPS device settings are configured and UPS devices are
associated with an infeed.
Selecting the UPS type:
Select the UPS manufacturer type from the UPS Type drop-down list and click Apply.
Editing the UPS Hostname/IP Address:
In the Hostname/IP field, type an IP Address or Hostname and click Apply.