Specifications

Operations  37
Installation and Operations Manual
Setting the user search filter:
Enter the User Search Filter in the User Search Filter field and click Apply.
Setting the group membership attribute:
Enter the group membership attribute in the Group Membership Attribute Field and click Apply.
Setting the group membership value type:
Select the appropriate value from the drop-down menu and click Apply.
Configuring the authentication order:
Select Remote -> Local or Remote Only from the drop-down menu and click Apply.
NOTE: Server Technology recommends not setting the authentication order to Remote Only until LDAP has been
configured and tested.
Setting the DNS IP address:
For information about setting the DNS IP address, see the Network section in this manual.
Configuring LDAP groups:
Click on the LDAP Groups link at the bottom of the page.
Creating an LDAP group:
Enter a descriptive group name in the LDAP Group Name field. Up to 24 alphanumeric and other typed
characters (ASCII 33 to 126 decimal) are allowed; spaces are not allowed. Click Apply.
Removing an LDAP group:
Click on the Remove link in the Action column for the group to be removed and click OK on the
subsequent confirmation window.
Changing an LDAP group’s access privilege level:
Click on the Edit link in the Action column for the associated LDAP Group.
On the subsequent LDAP Group - Edit page, select Admin, User, On-only or View-only from the
Access Level drop-down menu and click Apply.
Granting or removing environmental monitoring viewing privileges:
Click on the Edit link in the Action column for the associated LDAP Group.
On the subsequent LDAP Group - Edit page, select Yes or No from the Environmental Monitoring
drop-down menu and click Apply.
Adding and deleting outlet access:
Click on the Outlets link in the Access column for the associated LDAP Group.
On the subsequent LDAP Group - Outlets page, select or deselect outlets to be accessed by the LDAP
Group and click Apply.
Adding and deleting outlet group access:
Click on the Groups link in the Access column for the associated LDAP Group.
On the subsequent LDAP Group - Groups page, select or deselect outlet groups to be accessed by the
LDAP Group and click Apply.
Adding and deleting serial port access:
Click on the Ports link in the Access column for the associated LDAP Group.
On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the LDAP Group
and click Apply.