Manualshelf

Specifications

ManualsBrandsServer Technology ManualsComputer equipmentPT22
51525354555657585960
Operations 53
Installation and Operations Manual
Input Feed Administration
Creating a descriptive infeed name:
The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is
displayed when the Show Traps command is issued.
To create a infeed name:
At the Switched CDU: prompt, type set infeed name followed by the absolute infeed name, then a
descriptive name of up to 24 alphanumeric and other typed characters - (ASCII 33 to 126 decimal) are
allowed; spaces are not allowed. Press Enter.
Example
The following command adds the descriptive name HQ_1_Infeed_A to the infeed on the PT22:
Switched CDU: set infeed name .aa HQ_1_Infeed_A<Enter>
Setting the infeed operational voltage
The Set Infeed Voltage command is use to edit the input operational voltage.
To set the infeed operational voltage:
At the Switched CDU: prompt, type set infeed voltage, followed by the absolute infeed name, and a
value from 0 to 480. Press Enter.
Example
The following commands sets the operational voltage for input .AA to 100V:
Switched CDU: set infeed voltage .aa 100<Enter>
Setting the infeed maximum load capacity
The Set Infeed LoadMax command is use to edit the input maximum load capacity.
To set the infeed maximum load capacity:
At the Switched CDU: prompt, type set infeed Loadmax, followed by the absolute infeed name, and a
value from 1 to 255 (in amperes). Press Enter.
Example
The following commands sets the maximum load capacity for input .AA to 15 amperes:
Switched CDU: set infeed loadmax .aa 15<Enter>
Displaying infeed information:
The Show Infeeds command displays information about all infeeds. This information includes the
absolute and descriptive infeed names, operational voltages and maximum load capacities.
To display tower information:
At the Switched CDU: prompt, type show infeeds and press Enter.
Example
Switched CDU: show infeeds<Enter>
Input Input Input Input
Feed ID Feed Name Feed Voltage Feed Capacity (Amps)
.AA HQ_1_Infeed_A 100 15
.AB HQ_1_Infeed_B 120 20
.BA HQ_2_Infeed_A 120 30
.BB HQ_2_Infeed_B 120 30