Specifications

Operations  57
Installation and Operations Manual
Setting the tower model number:
The Set Tower Model command is use to set the product model number.
NOTE: If set at the factory, you cannot edit the model number.
To set the tower model number:
At the Switched CDU: prompt, type set tower model, followed by the absolute tower name, and the
tower model number. Press Enter.
Example
The following command sets the model number for tower .A to ‘CW-8H1-C20’:
Switched CDU: set tower prodsn .a CW-8H1-C20<Enter>
Setting the tower AC or DC voltage type:
The Set Tower command is used to set the product input AC or DC voltage type.
NOTE: If set at the factory, you cannot edit the voltage type.
To set the tower AC/DC voltage type:
At the Switched CDU: prompt, type set tower, followed by ac or dc, and the absolute tower name.
Press Enter.
Example
The following command sets the AC/DC voltage type for tower .A to AC:
Switched CDU: set tower ac.a<Enter>
Setting the tower AC voltage type:
The Set Tower 3phase command is used to set the product input AC voltage type.
NOTE: If set at the factory, you cannot edit the voltage type.
To set the tower AC voltage type:
At the Switched CDU: prompt, type set tower 3phase, followed by the absolute tower name and yes or
no. Press Enter.
Example
The following command sets the AC voltage type for tower .A to non-3-phase:
Switched CDU: set tower 3phase.a no<Enter>
Displaying tower information:
The Show Towers command displays information about the PT22. This information includes the
absolute and descriptive unit names, serial and model numbers, and voltage types.
To display tower information:
At the Switched CDU: prompt, type show towers and press Enter.
Example
Switched CDU: show towers<Enter>
Tower ID: .A
Name: TowerA
Product S/N: AA06F011157
Model No.: CW-8H1-C20
Power Type: AC
3-Phase: No
Command Successful