Specifications

Operations  65
Installation and Operations Manual
To enable or disable coldboot alert:
Upon a coldboot of the system (if the Coldboot Alert feature is enabled), the system sends a ½ second
RS-232 break out on any serial ports that are also enabled.
The Set Option Coldboot Alert command enables or disables the Coldboot Alert feature.
To enable or disable coldboot alert:
At the Switched CDU: prompt, type set option cbalert, followed by enabled or disabled, and press
Enter.
Displaying system options:
The Show Options command displays all system option information.
To display system option information:
At the Switched CDU: prompt, type show options and press Enter.
Example
Switched CDU: show options
System Options
Display Orientation: NORMAL
Outlet Sequence Order: NORMAL
Strong Passwords: DISABLED
Configuration Reset Button: ENABLED
More Prompt: ENABLED
Temperature Scale: CELSIUS
CLI Session Timeout: 10 minutes
Web Session Timeout: 10 minutes
Coldboot Alert <SCP>: DISABLED
Displaying the firmware version:
The Version command displays the firmware version.
To display the firmware version:
At the Switched CDU: prompt, type version and press Enter.
Performing a warm boot:
The Restart command performs a warm boot of the PT22.
NOTE: System user/outlet/group/port configuration or outlet states are not changed or reset with this command.
To perform a warm boot:
At the Switched CDU: prompt, type restart and press Enter.