Specifications

Operations  67
Installation and Operations Manual
To set a blank EnergyWise secret:
A blank secret is acceptable.
At the Switched CDU: prompt, type set energywise secret, do not type in the Secret field, and press
Enter twice (to bypass the Secret field and then VerifySecret field.)
Example of a blank secret
Switched CDU: show energywise
EnergyWise Configuration
Endpoint: Enabled*
Port: 43440
Domain: (undefined)
Refresh Rate: 180
Secret: (Blank)
Command successful
Viewing Cisco EnergyWise network parameters:
NOTE: A change in any value (shown in the example below) requires a restart of the system.
To view EnergyWise network parameters:
At the Switched CDU: prompt, type show energywise, and press Enter.
Example
Switched CDU: show energywise
EnergyWise Configuration
Endpoint: Enabled*
Port: 666
Domain: dominion
Refresh Rate: 88
Secret: ********
*Value changed – restart required
Command successful