Specifications

74  Operations
Installation and Operations Manual
Displaying FTP configuration information:
The Show FTP command displays all FTP configuration information.
 FTP Host IP address
 FTP Host username and password
 Firmware filepath and filename
To display FTP configuration information:
At the Switched CDU: prompt, type show ftp and press Enter.
Example
The following command displays the FTP configuration information:
Switched CDU: show ftp<Enter>
FTP Configuration
Host: 10.1.2.100
Username: taxe
Password: *******
Directory: /firmware/7.0d
Filename: swcdu-v70e.bin
FTP Automatic Updates Configuration
Automatic Updates: Enabled
Scheduled Day: Friday
Scheduled Hour: 1 PM
SNTP Administration
The PT22 supports the use of a network time service to provide a synchronized time reference.
About Daylight Savings Time (DST)
Support for DST is disabled by default. When enabled, the date and time are automatically adjusted
forward one hour between the starting and ending dates and times (which can be configured).
NOTE: If DST is enabled, all system time displays are shown with the current Daylight Savings Time
(DST) start/end date/time settings.
The default time zone is set for the United Stated until at least 2015.
The time zone format is: mo.w.d/h:m:s, as follows:
mo = month from January to December (1-12)
w = week number (1-4) or the last week (5)
d = day of week from Sunday to Saturday (0-6)
h = hour (0-23)
m = minute (0-59)
s = second (0-59)