Specifications

76  Operations
Installation and Operations Manual
Displaying SNTP configuration information:
The Show SNTP command displays all SNTP configuration information.
To display SNTP configuration information
At the Switched CDU: prompt, type show sntp and press Enter.
Example
The following command displays the SNTP configuration information:
Switched CDU: show sntp <Enter>
Date/Time: 2013-04-13 15:21:18
Primary Host: 204.152.184.72
Secondary Host: 1.pool.ntp.org
Local GMT Offset: -8
Use DST: Enabled
Start Date: first Wednesday in April
Start Time: 04:18:06
End Date: last Sunday in November
End Time: 02:00:00
UPS Administration
Creating a UPS record:
The Create UPS command adds a new UPS device to the PT22.
To create a UPS record:
At the Switched CDU: prompt, type create UPS and press Enter.
At the prompt, type the corresponding number from the list of the UPS types and press Enter.
At the Host Name: prompt, type the UPS’s IP address or hostname and press Enter.
NOTE: Both IPv4 and IPv6 formats are accepted for IP address or hostname.
Example
The following command creates a UPS record for a Toshiba UPS with the hostname ‘DC1Toshiba1’:
Switched CDU: create ups<Enter>
UPS types:
1 -- APC
2 -- Liebert
3 -- MGE
4 -- Tripp Lite
5 -- Generic (RFC1628)
6 –- Hewlett Packard
7 -- Minuteman
8 -- Mitsubishi
9 -- Powerware
10 -- Toshiba
Select type(1-10): 10<Enter>
Host/IP: DC1Toshiba1<Enter>