Specifications

86 Advanced Operations
Installation and Operations Manual
Setting the Get/Set community strings:
NOTE: The default for SNMP support is Enabled. When Server Technology products are shipped, the default SNMP
configuration for the GET community string is set to “public” and the SET community string is left blank.
The PT22 supports two SNMP community strings (SET and GET) that provide varying levels of access
to objects defined in the Sentry3 MIB. Valid community strings are 1 to 24 characters.
Set Community String:
The Setcomm string provides read-write access to sentry3 MIB objects. The default Setcomm string is
blank.
To set the Setcomm community string:
At the Switched CDU: prompt, type set snmp v2 setcomm, followed by the string, and press Enter.
Get Community String:
The Getcomm string provides read-only access to sentry3 MIB objects. The default Getcomm string is
“public”.
To set the Getcomm community string:
At the Switched CDU: prompt, type set snmp v2 getcomm, followed by the string, and press Enter.
Displaying SNMP v1/v2 configuration information:
The Show SNMP V2 command displays all SNMP v1/v2configuration information, including:.
SNMP support status
SNMP community strings
Trap timer value
Trap destinations (both IPv4 and IPv6 formats can be displayed.)
To display SNMP v1/v2 configuration information:
At the Switched CDU: prompt, type show snmp v2 and press Enter.
Example
The following command displays the SNMP v2 configuration information:
Switched CDU: show snmp v2<Enter>
SNMP Configuration
SNMPv2: Enabled
GET Community String: ABC
SET Community String: DEF
SNMPv3: Disabled
V3 RW Username: (undefined)
V3 RW Auth Type: None <password not set>
V3 RW Privacy Type: None <password not set>
V3 RO Username: (undefined)
V3 RO Auth Type: None <password not set>
V3 Trap Username dsmith
Trap Destination 1 : 10.1.2.80
Trap Destination 2 : 10.1.6.52
Trap format : v3
IP Restrictions: No Restrictions
Error Trap Repeat Time : 60 seconds
SysName: Sentry3_524640
SysLocation: Test_Loc2
SysContact: David Smith
Command successful