Specifications

Advanced Operations  89
Installation and Operations Manual
Setting the SNMP v3 trap username:
The Set SNMP Trap Username command sets an optional username for display on SNMP activity logs
to identify user actions.
At the Switched CDU: prompt, type set snmp v3 trapusername, and press Enter. The trap username
can be 1-31 alphanumeric characters; spaces are allowed; and the name is case sensitive.
Setting the error trap repeat timer:
The Set SNMP Traptime command sets the timer period between repeated error condition traps.
The valid range is 1 to 65535 (in seconds). The default is 60 seconds.
To set the error trap repeat timer:
At the Switched CDU: prompt, type set snmp traptime, followed by the timer period, and press Enter.
Example
The following sets the timer period to 180 seconds:
Switched CDU: set snmp traptime 180<Enter>
Setting IP Restrictions:
The Set SNMP IP Restrictions command supports SNMP Manager Get and Set requests to only be
allowed from the IP address of the defined trap destinations.
To set SNMP IP restrictions:
At the Switched CDU: prompt, type set snmp iprestrict trapdests and press Enter.
To remove SNMP IP restrictions:
At the Switched CDU: prompt, type set snmp iprestrict none and press Enter
Setting the SNMP SysName:
The Set SNMP SysName command is used to set the SNMP MIB-II SysName object.
To set the SysName object:
At the Switched CDU: prompt, type set snmp sysname, followed by the object name and press Enter.
Setting the SNMP SysLocation:
The Set SNMP SysLocation command is used to set the SNMP MIB-II SysLocation object.
To set the SysLocation object:
At the Switched CDU: prompt, type set snmp syslocation, followed by the object location and press Enter.
Setting the SNMP SysContact:
The Set SNMP SysContact command is used to set the SNMP MIB-II SysContact object.
To set the SysContact object:
At the Switched CDU: prompt, type set snmp syscontact, followed by the object contact and press Enter.
Displaying SNMP configuration information:
The Show SNMP command displays all SNMP configuration information.
 SNMP version (v2/v3) support status (enabled/disabled)
 SNMP community strings
 Read-Only (RO) or Read-Write (RW) username, authentication type, privacy type (if SNMPv3)
 Trap username
 Trap destination(s)
 IP restrictions setting
 Error trap repeat time (in seconds)
 Sysname, syslocation, and syscontact