01884-RevB-062512 important INSTRUCTIONS pump parts model: CP-RP KNOB CP Remote Pump, tall, short cylinder Series 10A 85951 LOCKING COLLAR GAGING COLLARS (Portion Control) Each collar added reduces portion served by .25 oz .
Clean-In-Place Procedure for Pumps clean-in-place is a basic four step pump flushing process: clean, rinse, sanitize, and rinse. clean: 1 Pump out all (if any) remaining food product from inside pump body. 2 3 Wash and rinse off outside of pump body. Pump Disassembly Before first use and after use daily, disassemble and clean pump. 1 Pump out all (if any) remaining food product from inside pump body. 2 3 Wash and rinse off outside of pump body.
Pump Assembly Before first use and after use daily, disassemble and clean pump. Assemble Plunger Apply Food Equipment Lubricant onto Seal and Seal 0-Ring Assemble Plunger: 1 Install seal o-ring inside seal. 2 Install seal assembly onto piston head. • Apply food equipment lubricant on seal o-ring. • Apply food equipment lubricant inside seal assembly. • Flared end of seal assembly should be facing away from piston head. 3 4 5 Install washer onto threaded end of piston.
1 Attach hose to product pouch General Service, Repair, or Returns Before sending any item to Server Products for service, repair, or return, contact Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number. Merchandise being returned for credit must be in new and unused condition and not more than 90 days old and will be subject to a 20% (percent) restocking charge. Electrical parts (thermostats, heating elements etc.
