CSP-EZ (94160 /94150 ) User Manual

cone washer
valve cover
UNIT TROUBLESHOOTING
POSSIBLE PROBLEM:
•
Unit does not cool.
POSSIBLE SOLUTIONS:
•
Ensure cord is securely plugged in.
Verify that cord is securely plugged into the unit,
the power supply (adaptor), and the power source
(electrical outlet).
• Ensure power is available from source.
• Ensure unit is on.
• Ensure fan is on/running.
• Ensure lter is clean or replace if necessary.
VALVE COVER ASSEMBLY
a
INSTALL CONE WASHER INTO VALVE COVER.
b INSTALL VALVE COVER, WITH CONE WASHER
INSIDE, ONTO DISCHARGE TUBE THREADING.
c ROTATE VALVE COVER CLOCKWISE TO SECURE TO
THREADS OF DISCHARGE TUBE.
Do not use any sharp tools for assembly,
this can damage parts.
b
a
c
VALVE COVER ASSEMBLY
PUMP TROUBLESHOOTING
PROBLEMS WITH PUMP OPERATION AND/OR FLOW:
• Clean pump.
PUMP DISPENSES LITTLE OR NO PRODUCT.
• Product may be too stiff or contain a solid
that will not pass through pump.
PORTION CONTROL IS NOT CONSISTENT.
• Inspect gaging collar for any damage and/
or proper installation.
PUMP PLUNGER DOES NOT RETURN TO TOP OF
STROKE AFTER DISPENSING PRODUCT.
• Inspect spring for any damage; bent or
broken. Replace spring if necessary.
PUMP DRIPS.
• Clean discharge tube with supplied
cleaning brushes.
• Ensure product is not being heated by
any external source(s) causing product to
expand and drip from pump.
b
a
a