User Manual LKS-CD17SR 17” LCD Single Rail Console Drawer with Modular KVM Switch LKS-CD19SR 19” LCD Single Rail Console Drawer with Modular KVM Switch Rev 2.
ServerLink LKS-CD17SR / CD19SR User Manual Packing List The complete LKS-CD17SR / LKS-CD19SR single rail console with modular KVM switch package consist of: One 1U 19” rack mount console Two rails with front and rear bracket Two extended brackets Two Short brackets Two KVM switch brackets Two bracket attachments LKS-CD17SR bracket attachment LKS-CD19SR bracket attachment I
ServerLink LKS-CD17SR / CD19SR User Manual One 1.8 m KVM cable (HDDB-15 / VGA + PS/2 x 2) One USB cable One DC power adapter One power cord One user manual CD One quick installation guide Two keys Six flat screws (for rail mount to console body) Six screws (for replace extended bracket) Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact your dealer.
ServerLink LKS-CD17SR / CD19SR User Manual current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and the current rating marked on the product. 11. All cautions and warning on the equipment should be noted. 12. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being damaged by transient over-voltage. 13.
ServerLink LKS-CD17SR / CD19SR User Manual Index of Contents Packing List ............................................................................................................................................. I Safety Instructions............................................................................................................................... II Index of Contents .............................................................................................................................
ServerLink LKS-CD17SR / CD19SR User Manual 3.3.1 Configuring the Display Settings ............................................... 26 3.3.2 Connecting the Console ............................................................ 27 3.4 Turning on the Console ..................................................................... 27 3.5 Testing the Console ..........................................................................
LKS-CD17SR / CD19SR User Manual 1. General Information Single rail consoles with modular KVM switch offer industrial level input solution to optimize your space utilization by controlling your systems in just 1U. With the unique modular design, you can easily upgrade to more ports by just changing the KVM module. Cacscading more KVM modules allows you to control hundres of servers from one single console drawer. 1.1 Features Easy to install, single rail design.
LKS-CD17SR / CD19SR User Manual 1.2 Benefits 1. Modular KVM design. The user can start by purchasing a single console model and then expand to 8, 16 or even 32 ports by just changing the KVM module. 2. With the unique separate rail design, one person can install the console easily. If you need to remove the console, you can easily uninstall without effecting the server above or below. 3. Easy to maintain.
LKS-CD17SR / CD19SR User Manual 1.4 Product Specification 1.4.1 LKS-CD17SR Specification Model name LKS-CD17SR Number of ports 1 Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 13 Kg / 28.7 lbs Gross Weight 20.5 Kg / 45.2 lbs Display Size 17 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.264 mm x 0.
LKS-CD17SR / CD19SR User Manual Figure 1-1.
LKS-CD17SR / CD19SR User Manual 1.4.2 LKS-CD19SR Specification Model name LKS-CD19SR Number of ports 1 Dimension 520.1 x 447.5 x 44 mm / 24.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 14 Kg / 30.9 lbs Gross Weight 21.5 Kg / 47.4 lbs Display Size 19 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.098 mm x 0.
LKS-CD17SR / CD19SR User Manual Figure 1-2.
LKS-CD17SR / CD19SR User Manual 2. Panel Controls and OSD Function Controls Description Soft power on/off button. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Press to scroll the function you want to adjust. Press to scroll the function you want to adjust. Menu To access the main menu. This button also acts as the “Enter” button. Table 2-1. Panel Controls Figure 2-1.
LKS-CD17SR / CD19SR User Manual 2.2 Input Source 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the“menu”button to enter,and you will see: VGA / DVI 4. Use the “Down” and “Up” button to select the input source of signal. 5. Press the “menu” button to enter 2.3 Brightness 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune.
LKS-CD17SR / CD19SR User Manual 2.4 Contrast 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 1. Press the “menu” button to enter. 2. Use the “Down” and “Up” button to adjust the contrast of the display. 3. Press the “menu” button to enter. 2.5 Color 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune.
LKS-CD17SR / CD19SR User Manual 3. Press the “menu” button to enter. And you will see: Icon Description 9300°K To set CIE coordinates at 9300°K color 7500°K To set CIE coordinates at 7500°K color 6500°K To set CIE coordinates at 6500°K color User To set user defined CIE Auto color To auto adjust color Return To exit and return to the previous page Table 2-2. Icon Description 4. Use the “Down” and “Up” button to adjust the color of the display. 5. Press “menu” to enter. 2.6 Position 1.
LKS-CD17SR / CD19SR User Manual 5. Press the “menu” button to enter. 2.7 Language 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter. And you will see: English German French Italian Spanish 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.8 Recall 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune.
LKS-CD17SR / CD19SR User Manual 3. Press the “menu” button to enter, and you will see: Yes/ No 4. Select “Yes” button then ‘Menu” button to recall the factory setting. Select “No “ to return to the previous page. 2.9 Exit Press the “exit” button to quit OSD menu. 2.
LKS-CD17SR / CD19SR User Manual 3. Installation 3.1 Install 17” / 19" Single Rail Console into Cabinet 3.1.1 Notes 1. Please check all components according to the contents list before installation to make sure none of the components were damaged or lost during shipping. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computers have been turned off. 3.
LKS-CD17SR / CD19SR User Manual 3. Short bracket x 2 4. KVM switch bracket x 2 5. Bracket attachment x 2 17" LCD console bracket attachment 19" LCD console bracket attachment 6. Screw (length = 6 mm) x 6 7. Screw x 6 8.
LKS-CD17SR / CD19SR User Manual 3.1.3 Step A (Install Console) 1. Adjust rail until two screws appear. rail two screws 2. Loosen (Do not remove) five screws. 3. Adjust rail to fit your cabinet 4. Install front and rear bracket on cabinet.
LKS-CD17SR / CD19SR User Manual 5. Tighten five screws. 6. Repeat step 1~5 for the other side. 7. Push console into rails. (Be careful rear box loose when take out console from carton.) 8. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end.
LKS-CD17SR / CD19SR User Manual 9. Install three screws (length = 6 mm) in rear of the console. (Both sides) 10. Finish installation as below. 3.1.4 Step B (Replace short bracket) 1. Remove five screws and keep them. 2. Take two original brackets out.
LKS-CD17SR / CD19SR User Manual 3. Put short bracket to rear of the rail. short bracket 4. Install four screws (don’t tight-up) to combine rail, short bracket and bracket attachment. bracket attachment short bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation. 3.1.5 Step C (Replace extended bracket) 1. Loose (Not remove) five screws.
LKS-CD17SR / CD19SR User Manual 2. Adjust rail and release six screws. 3. Take rear bracket out. original bracket 4. Adjust rail and input extended bracket to rear of the rail then adjust extended bracket to fit your cabinet. Install unless 2~3 screws (don’t tight-up) upon the length you need. One is forbidden. extended bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation.
LKS-CD17SR / CD19SR User Manual 3.2 Install Modular KVM Switch 3.2.1 Install Combo KVM Switch (8 / 16 Port High Density 15 Pin KVM) 1. Install four screws to combine bracket and KVM switch. (Both sides) 2. Push KVM switch into the rails from rear of console. 3. Install two screws to combine KVM switch and console.
LKS-CD17SR / CD19SR User Manual 3.2.2 Install Cat 5 KVM Switch (8 / 16 / 32 Port Cat 5 KVM Switch) Hardware Kits Contents 1. Bracket with thumb screw x 2 2. Bracket x 2 3. Screw (length = 6 mm) x 4 4. Screw x 4 Install KVM Switch Steps 1. Remove three screws and take original bracket out.
LKS-CD17SR / CD19SR User Manual 2. Install five screws to combine rail, bracket and original bracket attachment. (Both sides) 3. Follow the steps to install console into the cabinet. 4. Install two screws (length = 6 mm) to combine KVM switch and bracket with thumb screw. (Both sides) 5.
LKS-CD17SR / CD19SR User Manual 6. Tight thumb screw of bracket up to fix KVM switch in console (Both sides) and finish installation.
LKS-CD17SR / CD19SR User Manual 3.2.3 Unload Steps 1. Make sure the console has been locked and turned off. Loosen two screws (thumbscrews on Cat 5 KVM) 2. Pull out modular KVM switch. 3. Release three screws in rear of the console. (Both sides) 4. Unlock and pull console out until the console cannot go any further.
LKS-CD17SR / CD19SR User Manual 6. Pull rail-release switch and pull console out. rail-release switch 7. Push rail-lock switch on the rail and push rail back.
LKS-CD17SR / CD19SR User Manual 3.3 Installing the Video Card and Video Driver Before connecting the LCD console, make sure your computer has a video card already installed for the panel. After you connect the console, install the video software driver. The video driver is supplied by the video card manufacturer and may be found on the CD-ROM that came with your computer. If you need information on installing a video card or video driver, refer to the manual that came with your video card. 3.3.
LKS-CD17SR / CD19SR User Manual 3.3.2 Connecting the Console To connect an LCD console to a computer, perform the following steps PS/2-USB switch Figure 3-1. The rear view of LCD console 1. Turn off your computer. 2. Connect the video (VGA) connector of the KVM cable to the video card connector on the rear panel of your computer. 3. Identify and connect the PS/2 mouse and PS/2 keyboard connector to the correct PS/2 ports on the rear panel of your computer.
LKS-CD17SR / CD19SR User Manual If the unit does not power on when the panel is pulled up, try to push the power on/off button underneath or on the left of the LCD panel to power up the unit. You can adjust the horizontal and vertical position, contrast, and brightness to better suit your video card and your personal preference. Refer to Chapter 2 for more information on using the on-screen menu to adjust the video display.