Operator`s manual

OPERATION

2160 01/13 Operation Section 4-10

OPERATION

Never run the Tractor engine in a closed building or without adequate ventilation. The

exhaust fumes can be hazardous to your health.

(SG-23)

Start tractor only when properly seated in the Tractor seat. Starting a

tractor in gear can result in injury or death. Read the Tractor operators

manual for proper starting instructions.

(SG-13)

6.CONNECTING ATTACHING HEADS TO THE BOOM

1. Start by using a hoist to lower the boom down to

the head. Align the Boom with the Head Hitch Post,

insert the upper hitch pin through the Dipper end of

the boom and the Head Upper Hitch Post. Attach

with washer, nut, and cotter pin.

2. Then align the lower linkage of the Boom and

insert the lower hitch pin through hitch post. Attach

with nut and bolt.

3. Finally make sure all bolts, nuts, and pins are

tightened to recommended torque. OPS-B- 0004_H

IMPORTANT: Scan this QR Code with your smart phone to link to the PAMI Safe

Implement Hitching Manual for more information on correctly connecting

agricultural tractors to implements. Or type in your internet browser the following

web address: www.algqr.com/hme

Ops-0008-MISC

7.PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.

This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped

and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection

reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing

parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time

and repair cost can be avoided. OPS-U-0029