7600A Snow Blower Pub 06-05 Part No. 5047P PART'S MANUAL An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment.
TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.
PARTS SECTION Parts Section – 1
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2.
PART NAME INDEX CABLE ASSEMBLY................................................................................................................................................................ 6 CATEGORY 2 & 3 QUICK HITCH ASSEMBLY................................................................................................................... 13 CATEGORY 2 QUICK HITCH ASSEMBLY..........................................................................................................................
FAN DRIVE ASSEMBLY 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
FAN DRIVE ASSEMBLY ITEM PART NO. QTY.
CABLE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 00992000 CABLE, 1/4 X 35 -1/2FT 2 60042 35 1/2’ 6 WIRE ROPE CLAMP 1/4 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
OIL TANK PARTS ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00783029 00783037 00011400 00784028 00783692 03101646 00011100 1 1 6 1 14’ 6 6 COVER, CHAIN CASE DIPSTICK HHCS 3/8 NC 1 PL5 1" MAGNETIC DRAIN PLUG 3/8" X 1" OIL BATH SEALER 15’ LOCKWASHER,3/8,MEDIUM-ZP FLATWASHER 3/8 PL STD 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
INTERNAL DRIVE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 00783050 00783596 00783720 00783598 00750952 00001400 33007C 00001200 40662.
CHAIN IDLER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 00784038 00002701 6D5557 1436356 03100104 00000200 2 8 2 2 2 4 BOLT, CHAIN IDLER FLATWASHER,3/4,TYPE AW,ZP 3/4 SET COLLAR IDLER SPROCKET FLATWASHER 3/4 X 1-1/4 X 14GA NUT 3/4 NC HEX PL 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
3-POINT HITCH ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00784030 00784031 00784032 00784033 00784034 00784035 0838404 1 2 2 1 2 2 5 UPPER 3PT HITCH PIN LOWER CAT III HITCH PIN LOWER CAT II HITCH PIN BUSHING, UPPER HITCH PIN BUSHING, LOWER INNER HITCH PIN BUSHING, LOWER OUTER HITCH PIN KLICK PIN 7/16 X 2 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
CATEGORY 2 QUICK HITCH ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00784030 00784031 00784033 0838404 1 2 1 3 UPPER 3PT HITCH PIN LOWER CAT III HITCH PIN BUSHING, UPPER HITCH PIN KLICK PIN 7/16 X 2 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
STANDARD CATEGORY 2 & 3 WITHOUT QUICK HITCH ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00784030 00784032 00784034 00784035 0838404 1 2 2 2 3 UPPER 3PT HITCH PIN LOWER CAT II HITCH PIN BUSHING, LOWER INNER HITCH PIN BUSHING, LOWER OUTER HITCH PIN KLICK PIN 7/16 X 2 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
CATEGORY 2 & 3 QUICK HITCH ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00784030 00784031 00784033 0838404 1 2 1 3 UPPER 3PT HITCH PIN LOWER CAT III HITCH PIN BUSHING, UPPER HITCH PIN KLICK PIN 7/16 X 2 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
STANDARD CATEGORY 3 HITCH WITHOUT QUICK HITCH ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00784030 00784031 00784033 00784035 0838404 1 2 1 2 3 UPPER 3PT HITCH PIN CAT III HITCH PIN BUSHING, UPPER HITCH PIN BUSHING, LOWER OUTER HITCH PIN KLICK PIN 7/16 X 2 7600A Snowblower (June-05) -Current ©2005 Alamo Group Inc.
HYDRAULIC CYLINDER & HOSE KIT (OPTIONAL) ITEM PART NO. QTY.
DRIVELINE ASSEMBLY (OPTIONAL) - 00784015 ITEM PART NO. QTY.
DRIVELINE ASSEMBLY (OPTIONAL) - 00784016 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 9 10 11 12 13 14 00724738 00725126 W507 00784049 00780376 00756005 00756004 00784050 00784051 00784046 00784047 00784052 1 1 2 1 2 1 1 1 1 1 1 1 KIT-SLIDE COLLAR REPAIR YOKE SLIDE LOCK 1-3/4-20 SPL.
SERVIS-RHINO LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or workmanship. 1.02.
TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER: 1. 2. 3. 4.
7600A PL 06/05 Printed U.S.A.
