User`s manual

<12 page>
7. Storage and Temperature Range
Your Servore welding helmet is strong and durable. It is designed to work in
temperatures between -5C and +55C. Do not use your helmet in very hot
conditions where temperatures exceed +65C. Always store your helmet in a
clean dry place out of the direct sun and protect it from exposure to moisture or
extreme heat (min/max storage temperature is -20C ~ +70C).
Avoid unnecessary impact or compression of your helmet and never use a
helmet that is damaged. Your Servore welding helmet is a quality professional
tool and careful storage will extend the life of your investment.
8. Inspection
Check your helmet shell and filter on a regular basis when in normal use and
after extended periods of storage. Never use a cracked or damaged helmet as
this may result in personal injury and will void your warranty. Please replace
any worn or damaged parts as necessary. Genuine ServoGlas® replacement
parts are available from your authorized Servo Glas® distributor.
9. Cleaning
Note
Never expose the filter cartridge to direct contact with water
or solvents.
After removing the welding filter from the shell the shell can be cleaned using a
mild detergent and water solution. Sweat bands can be washed. A silicone