Specifications

30
SERVSWITCH
™
BRAND CAT5 KVM EXTENDER
6.2.2 A TTACHING A S ERV S WITCH F AMILY KVM S WITCH TO AN E XTENDER U NIT ’ S CPU P ORT
The way you’ll do this will depend on what kind of user ports the KVM switch has:
multiple connectors (see Section 6.2.2.A) or single connectors (see
Section 6.2.2.B). (Refer to the listings in Section 4.2.2 for which ServSwitch family
models are in which category.)
6.2.2.A Attaching a Switch with Multiple User-Port Connectors
Run the included extension cabling from the video, keyboard, and mouse
connectors in the Extender Unit’s CPU port to the matching connectors in one of
the KVM switch’s user ports.
Figure 6-3. Attaching a KVM switch with multiple user-port connectors to
the Local Unit’s CPU port (Single-Access model shown).
Figure 6-4. Attaching a KVM switch with multiple user-port connectors to
the Switching Remote Unit’s CPU port.
4-Port ServSwitch Wizard Pro (SW644A)
8-Port ServSwitch Wizard Pro (SW648A)
Local Unit
Switching
Remote Unit
KVM-extension cabling,
included with all models
CPU cable, included with
Switching Extender