Quick Start Guide

The AP-2010 by imagotag is the communication center in the store that transmits price information

to the labels. In order to ensure the communication between ESL server, access point AP-2010 and

the labels the access point has to be configured at the start of the ESL Server.

One way to configure the access point is on the client.

Figure 12 - ESL Client Access Point Configuration

Before labels are able to communication with the server at least one access point needs to be

configured. In standard configuration the AP-2010 should get an IP-address via DHCP

(recommended) and is accessible via web-GUI:

URL: http://<DHCP-IP-address>

: In this part of the Quick Start Guide it is assumed that a DHCP server is present

(you can find the steps to discover the access point without DHCP in the [Troubleshooting] section at

points 1.3 and 1.4).

Before you can configure the access point it’s necessary that the server will discover it.

The following points have to be observed: