Quick Start Guide

In order that labels can join the network it is necessary to register them first.
Via the ESL Client under File -> Register Labels it’s possible to register your labels manually with the
registration code shown on each single label or you could import a CSV file with your registration
codes. In order to refresh the entries press the refresh button shown in Figure 17.
: After the registration it could last a certain time until all registered labels are
joined to the network (from 30 minutes up to two hours, depending on configured access point
channels). After this you can send images to each label (see Start tagging).
Figure 17 - Add/Delete Label and refresh entries
All labels will arrive with its registration code shown on the display of the label. The code is printed as
a 2D QR code, as a 1D Code128 barcode and as human readable text. The registration process for the
customer is easy – he has only to scan one of this barcodes. The imago gateway will than
automatically start the key exchange with the label secured by the PIN extracted from the
registration code.