Quick Start Guide

You still got problems to find your AP in your network? There's another workaround: You can use
Apple's "Bonjour Print Services".
Download and install “Bonjour Print Services“ for Windows (pre-installed under OSX):
http://support.apple.com/kb/DL999
: After installation there’s no reboot required.
If the access point is connected directly to the system where the “Bonjour Service” is installed (or on
a network with running “Bonjour Service”) you can find the access point by typing the following in
the browser of your choice:
http://ap-<ID>.local:8080 (e.g. http://ap-12724.local:8080)
: You can reach older versions of the AP with http://imagotag-ap.local:8080 (custom hostnames
are only available on newer versions of the access point)
 Check the AP status
 Check AP configuration
o No Channel set
 Check network reachability of AP
 AP registered to Server?
 Reboot AP
After the registration it could last a certain time until all registered labels are joined to the network
(up to two hours, depending on number of access points and the channels used).
Warning: A label must not be registered to multiple ESL server installations at the same time. It will
only connect to one of this installations.
Check the encryption passphrase in Server Configuration (System – Configuration).
If label was already registered with a different passphrase you’ll have to unlock the label first in order
to register it on the server.
If the label was registered and a communication key was set it will no longer work in other networks
using a different network key passphrase. To unlock this labels for other networks an unlock code is
required.
Select File – Unlock labels and enter the unlock key.