Quick Start Guide
Table Of Contents
- 1 Electronic Shelf Labeling – A brief introduction
- 2 Label Family Introduction
- 3 Get the latest software and documentation
- 4 Core Appliance
- 5 Core Appliance initial setup
- 6 Start SES-imagotag Core Service and SES-imagotag Control Center
- 7 ESL Access Point Configuration
- 8 Selecting channels
- 9 Setup Security
- 10 Register labels
- 11 Start tagging
- 12 Templates
- 13 Integration
- 14 Troubleshooting
- 14.1 SES-imagotag Core Service Dashboard
- 14.2 Running the SES-imagotag Core Service as a background service
- 14.3 Where can get a demo/development license key?
- 14.4 Deleting the demo articles
- 14.5 Establish a network configuration when no DHCP is available – Step by step
- 14.6 Access point discovering with Bonjour Services
- 14.7 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 14.8 Labels don’t come online
- 14.9 The encryption does not work
- 14.10 Unlocking labels
- 14.11 Starting Java applications
- 14.12 Encoding problems
- 14.13 Reserve RAM for Java heap space
- 14.14 Further documentation
- 15 Declaration
Core Service Quick Start Guide
Page 29 of 42
It’s also possible to create Matchings with SES-imagotag Control Center under Labels and Articles,
for this just select the desired article or label, right-click on it and select “New matching…” (the new
matching dialog will be pre-filled with the article or label information).
11.5 Set (extended) filters for enums
There are various filter options. Besides the known filter options you'll now have the possibility to set
extended filters. Enable/disable the extended filter as shown in image below.
FIGURE 1-28: Use and enable the extended filter mode
With the extended filter options it's possible to set and combine several filters. Click on the drop down
menu to see the different choices.
FIGURE 1-29: SES-imagotag Control Center extended filter options
11.5.1 Extended filter operators
The following operators are available: