G1 Labels Product Specification Last change: 26.02.
G1 Labels Product Specification 1 Label Family Introduction 1.1 General Key Features 4 4 1.2 The G1 label family 2 Barcode Information 2.1 Serial Number 4 5 5 2.1.1 Producer is 01 2.1.2 Producer is not 01 3 Mechanical Characteristics 3.1 Technical characteristics 5 6 7 7 3.1.1 G1 1.6 BWR 7 3.1.2 G1 2.2 BWR 8 3.1.3 G1 2.6 BWR and G1 2.7 BW / BWR 8 3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR 9 3.1.5 G1 4.5 BWR 9 3.1.6 G1 6.0 BWR 10 3.1.7 G1 7.4 BW / BWR 10 3.1.8 S-tag 6 HF 11 3.
G1 Labels Product Specification 9.2 Instructions 22 9.3 Steps 22 9.3.1 G1 1.6 BWR 9.3.2 All labels except G1 1.6 BWR 10 Reliability Test Items 11 Certifications 11.1 Types 22 22 23 24 24 11.2 Overview 24 11.3 Applied Standards 24 11.4 Declaration 25 11.4.1 FCC 25 11.4.2 IC 25 11.4.3 IFT 25 11.4.4 NCC 警語: 12 Packing 12.1 G1 1.6 BWR 25 26 26 12.2 G1 2.2 BWR 26 12.3 G1 2.6 BWR 26 12.4 G1 2.7 BW / BWR 27 12.5 G1 4.2 BW / BWR 27 12.6 G1 4.4 BW / BWR 27 12.7 G1 4.5 BWR 28 12.
G1 Labels Product Specification 1 Label Family Introduction The SES-imagotag electronic shelf label family offers high-quality display options, operating with a replaceable battery, thus working without any external power supply. The performance of the labels (updates per hour) depends on the mode of the access point. In the USA and Canada the AP-2010 usa/canada bundle incl. antenna with limited data efficiency is required (based on the FCC/IC regulation). 1.
G1 Labels Product Specification 2 Barcode Information The labels come with a label ID (which is a unique identifier – just like a MAC address) and this label ID as a barcode on the display (and printed on the back of the label). The label ID consists of 8 hexadecimal digits (0-9 / A-F). The first 2 digits identify the different label types, shown on the following table: 2.1 Caption G1 1.6 BWR NFC G1 2.2 BWR NFC Label-ID F1xxxxxx A5xxxxxx G1 2.6 BWR NFC B6xxxxxx G1 2.7 BW NFC G1 2.7 BWR NFC G1 4.
G1 Labels Product Specification 2.1.
G1 Labels Product Specification 3 Mechanical Characteristics 3.1 Technical characteristics The G1 labels are made of several external parts: 1. Battery Cover including a. Label ID b. Label ID barcode c. S/N 2. Battery pack / Coin cell 3. Main Unit including a. Back Cover b. PCB c. Display d. Transparent Front Cover 4. Front Cover Frame a. Customizable in design and color b. Replaceable 3.1.1 G1 1.
G1 Labels Product Specification 3.1.2 G1 2.2 BWR 3.1.3 G1 2.6 BWR and G1 2.
G1 Labels Product Specification 3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR 3.1.5 G1 4.
G1 Labels Product Specification 3.1.6 G1 6.0 BWR 3.1.7 G1 7.
G1 Labels Product Specification 3.1.8 S-tag 6 HF 3.2 Mechanical Dimensions 3.2.1 G1 1.6 BWR Outline (mm): 49 x 36.8 x 14.8 Weight: 24 g 3.2.2 G1 2.2 BWR Outline (mm): 70.2 x 35.8 x 15.85 Weight: 38 g 3.2.3 G1 2.6 BWR Outline (mm): 83.6 x 42.5 x 16.
G1 Labels Product Specification Weight: 45 g 3.2.4 G1 2.7 BW / BWR Outline (mm): 85.7 x 50 x 16.6 Weight: 50 g 3.2.5 G1 4.2 BW / BWR Outline (mm): 114.9 x 88.9 x 17.
G1 Labels Product Specification 3.2.6 G1 4.4 BW / BWR Outline (mm): 114.9 x 88.9 x 17.4 Weight: 104 g 3.2.7 G1 4.5 BWR Outline (mm): 132.6 x 50.9 x 16.
G1 Labels Product Specification 3.2.8 G1 6.0 BWR Outline (mm): 149.0 x 111.1 x 15.0 Weight: 139g 3.2.9 G1 7.4 BW / BWR Outline (mm): 186.9 x 125.9 x 19.
G1 Labels Product Specification Page 15 of 30
G1 Labels Product Specification 4 Electrical & RF Characteristics 4.1 Power and Current Consumption The power supply are 1, 2 or 3 cell-button batteries. The following table will give you a short overview about all kinds of labels and their batteries. Battery lifetime 5 years Caption with N updates per day G1 1.6 BWR NFC 1x CR2450 3V 550 mAh 30 1 G1 2.2 BWR NFC 2x CR2450 3V 1100 mAh 15 2 G1 2.6 BWR NFC 2x CR2450 3V 1100 mAh 15 2 G1 2.7 BW NFC 2x CR2450 3V 1100 mAh 15 4 G1 2.
G1 Labels Product Specification 5 NFC All labels can be ordered with the NFC option. Labels with integrated NFC tag can be identified by the nameplate on the back of the label. FIGURE 1-1: Label with integrated NFC chip 5.1 Functionality If you put your NFC reading device on a label with integrated NFC chip, you will be automatically redirected to the following URL: https://nfc.imagotag.com/ [e.g. https://nfc.imagotag.com/A5004824] FIGURE 1-2: NFC redirection to nfc.imagotag.
G1 Labels Product Specification A customer starts the mobile application and put his/her smartphone next to the label with integrated NFC chip which belongs topasta. The developed application retrieves the product information data from the ESL system and pushes corresponding recipes to his/her smartphone. 5.1.
G1 Labels Product Specification 6 Environmental 6.1 General Temperature l l l black/white labels l 0° C to + 45° C black/white/red labels l 10° C to 40° C optimal operating temperature at 21 ° C. Humidity: 10% to 80% (non-condensing) 6.2 Cleaning Instructions Clean the electronic label with the help of a damp cloth. Note: Do not use liquid or aerosol cleaners and keep it away from water. 6.
G1 Labels Product Specification 7 Storage and warehousing We strongly recommend to observe the following points in order to ensure the best operation, functioning and battery lifetime: l l l l l Storage temperature l -10° C to 40° C l Optimal operating and storage temperature at 21 ° C Humidity l 10% to 85% (non-condensing) It isn't allowed to operate an SES-imagotag AP-2010 or LANCOM access point in the warehouse or in radio coverage area.
G1 Labels Product Specification 8 Battery lifetime For the definition of N update/day following requirements apply to reach the specified lifetime: l l l l l The radio sync quality between labels and access points has to be “PERFECT” or “GOOD”. l To comply with these specifications, a Site Survey according to SES-imagotag GmbH guidelines is necessary. The declared number of updates per day is an average value applied on the specified lifetime.
G1 Labels Product Specification 9 Battery Replacement 9.1 Audience Only persons with the following knowledge are allowed to replace the battery: l l l 9.2 Instructions l l l l l l 9.3 Battery Electronic assemblies like circuit board Compliance of the instructions Risk of explosion through incorrect battery replacement. Use battery pack exclusive provided from the company SES-imagotag GmbH. Keep attention that your hands are dry before you start with the replacement.
G1 Labels Product Specification 10 Reliability Test Items l l l l l l l l l l l l High Temperature Operation Low Temperature Operation High Temperature/Humidity Operation High Temperature Storage Low Temperature Storage High Temperature/Humidity Storage Temperature Shock (Storage) Package Drop Test Package Random Vibration Test Food Contact Test Page 23 of 30
G1 Labels Product Specification 11 Certifications 11.1 Types Housing, board and the display are conform with the ROHS Directive The product meets the EU safety, health and environmental protection requirements and has the approval of CE marking This device complies with part 15 of the FCC Rules. Passed all tests according to “FOOD CONTACT” requirements 11.2 Overview Caption G1 1.6 BWR NFC G1 2.2 BWR NFC G1 2.6 BWR NFC G1 2.7 BW NFC G1 2.7 BWR NFC G1 4.2 BW NFC G1 4.2 BWR NFC G1 4.4 BW NFC G1 4.
G1 Labels Product Specification 11.4 Declaration The company SES-imagotag GmbH declares on his own responsibility that the G1 labels correspond to the standards mentioned above. 11.4.1 FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
G1 Labels Product Specification 12 Packing 12.1 G1 1.6 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 445 245 100 LAYER / UNIT 10 PALLET 1200 800 140 BOXES / LAYER 6 UNIT 800 1140 BOXES / UNIT 60 1200 SETS / BOX SETS / LAYER SETS / UNIT 100 600 6000 Purchase Unit: 100 labels / box Minimum Order Quantity: 6000 12.2 G1 2.
G1 Labels Product Specification 12.4 G1 2.7 BW / BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 400 270 135 LAYER / UNIT 9 PALLET 1200 800 140 BOXES / LAYER 8 UNIT 800 1355 BOXES / UNIT 72 1200 SETS / BOX SETS / LAYER SETS / UNIT 80 640 5760 Purchase Unit: 80 labels / box Minimum Order Quantity: 5760 12.5 G1 4.
G1 Labels Product Specification 12.7 G1 4.5 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 395 300 155 LAYER / UNIT 8 PALLET 1200 800 140 BOXES / LAYER 8 UNIT 800 1380 BOXES / UNIT 64 1200 SETS / BOX SETS / LAYER SETS / UNIT 80 640 5120 Purchase Unit: 80 labels / box Minimum Order Quantity: 5120 12.8 G1 6.0 BWR and G1 7.
G1 Labels Product Specification 13 Intended Use The G1 electronic shelf label family is exclusively designed to connect to AP-2010, MAP-2014T or LN-830E of the company SES-imagotag GmbH via radio. The device may only be used in areas where the environmental conditions be the same as described in the chapter see Environmental on page 19.
G1 Labels Product Specification 14 Improper Use Any use that is not mentioned in Section Intended Use (see Intended Use on page 1), shall be deemed to be improper. Any damage which result from improper use, the operator will assumes liability. The following usage is not allowed: l l l l l l l l l l l l l Never dismantle the electronic device because except battery there is no component which could be changed by someone who is not qualified. Don't drop it. Keep it away from water.
