Quick Start Guide
Table Of Contents
- 1 Electronic Shelf Labeling – A brief introduction
- 2 Label Family Introduction
- 3 Get the latest software and documentation
- 4 Core Appliance
- 5 Core Appliance initial setup
- 6 Start SES-imagotag Core Service and SES-imagotag Control Center
- 7 ESL Access Point Configuration
- 8 Selecting channels
- 9 Setup Security
- 10 Register labels
- 11 Start tagging
- 12 Templates
- 13 Integration
- 14 Troubleshooting
- 14.1 SES-imagotag Core Service Dashboard
- 14.2 Running the SES-imagotag Core Service as a background service
- 14.3 Where can get a demo/development license key?
- 14.4 Deleting the demo articles
- 14.5 Establish a network configuration when no DHCP is available – Step by step
- 14.6 Access point discovering with Bonjour Services
- 14.7 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 14.8 Labels don’t come online
- 14.9 The encryption does not work
- 14.10 Unlocking labels
- 14.11 Starting Java applications
- 14.12 Encoding problems
- 14.13 Reserve RAM for Java heap space
- 14.14 Further documentation
- 15 Declaration
- 16 Warning
Core Service Quick Start Guide
Page 11 of 45
# Set a nameserver
set dns 192.168.1.21
Note:This simple bridge configuration connects the network interfaces. No matter where the network
cable is plugged in, the appliance is accessible via the configured bridge address.
5.2 Front side LEDdescription
On the front side of the appliance you can see several status information:
Core Appliance front view LEDstatus information (Core Appliance version 1.8.0 or higher)
Upper LED:Power on
Lower LED: Core Appliance is active
Upper LED: OFF=service not running | Flashing=restart or software
update in progress | ON=service
Lower LED: OFF=no internet connection | Slow flashing=no VPN
configuration | Fast flashing=VPN not connected | ON=VPN connected
running
Upper LED: Port in use (color based on transfer rate)
Lower LED: Port/Device is active
5.3 Additional documentation
You can find additional documentation regarding the Core Appliance (e.g. a complete service mode
reference) on our SES-imagotag Customer and Partner Portal.