Quick Start Guide
Table Of Contents
- 1 Electronic Shelf Labeling – A brief introduction
- 2 Label Family Introduction
- 3 Get the latest software and documentation
- 4 Core Appliance
- 5 Core Appliance initial setup
- 6 Start SES-imagotag Core Service and SES-imagotag Control Center
- 7 ESL Access Point Configuration
- 8 Selecting channels
- 9 Setup Security
- 10 Register labels
- 11 Start tagging
- 12 Templates
- 13 Integration
- 14 Troubleshooting
- 14.1 SES-imagotag Core Service Dashboard
- 14.2 Running the SES-imagotag Core Service as a background service
- 14.3 Where can get a demo/development license key?
- 14.4 Deleting the demo articles
- 14.5 Establish a network configuration when no DHCP is available – Step by step
- 14.6 Access point discovering with Bonjour Services
- 14.7 What can I do if the Status LED of the AP-2010 access point doesn’t turn blue?
- 14.8 Labels don’t come online
- 14.9 The encryption does not work
- 14.10 Unlocking labels
- 14.11 Starting Java applications
- 14.12 Encoding problems
- 14.13 Reserve RAM for Java heap space
- 14.14 Further documentation
- 15 Declaration
- 16 Warning
Core Service Quick Start Guide
Page 33 of 45
After these steps your SES-imagotag Template Editor window should look something like this:
FIGURE 1-34: SES-imagotag Template Editor with loaded records from server and default.xsl template file
12.2.3 Design Mode
You can enable the graphical mode of the SES-imagotag Template Editor by selecting Settings –
Configuration – tick Enable Design Mode and finally the Save-button. The Design Mode can be
used for creating very simple templates. If you want to use for example conditions in your template,
you cannot use the design mode and you should start from zero without the design mode of the SES-
imagotag Template Editor.
FIGURE 1-35: Enable Design Mode in SES-imagotag Template Editor