Quick Start Guide

Table Of Contents
Core Service Quick Start Guide
Page 6 of 45
*One useable page is shared with the registration code page. This page is initially shown when the
label is shipped. After registration this page can be used as a custom page. To restore the original
content a service utility is required. To prevent accidentials overwrite this page is protected. To unlock
this page contact the SES-imagotag support team.
The content of all pages except page number 0 won't remain after a firmware update.
2.3 The VUSION label family
The SES-imagotag VUSION (2.4GHz) electronic shelf label family is capable of changing all pixels to
black, white or red. The current line-up has display sizes from 1.6 inch to 12.2 inch. They may be used
in landscape and portrait mode and can be configured in terms of radio, theft protection, display
protection and LED flash.
Caption Model
Display Res-
olution
Density
(dpi)
Display
Colors
Useable
Pages
Active Display
Area (mm)
Updates/hour/AP
(standard /
FCC&IC mode)
Battery
lifetime: 5
years with
N updates
per day
VUSION 1.6 EDG2-0160-A 152 x 152 140 b/w/r 4 27.5 x 27.5 7500/4600 1
VUSION 2.2
EDG2-0220-A
EDG3-0220-A
212 x 104 111 b/w/r 4 48.6 x 23.8 8500/5000 2
VUSION 2.2 F EDG2-0220-A 212 x 104 111 b/w 4 48.6 x23.8 10000/6500 1*
VUSION 2.6 EDG2-0260-A 296 x 152 125 b/w/r 4 60.1 x 30.7 4500/2600 2
VUSION 2.6 F EDG2-0260-A 296 x 152 125 b/w 4 60.1 x30.7 6500/4500 1*
VUSION 2.7
EDG2-0270-A
EDG2-0270-B
264 × 176 117 b/w/r 4 57.3 x 38.2 4500/2600 2
VUSION 3.7 EDG2-0370-A 416 x 240 130 b/w/r 4 81.54 x 47.04 2000/1300 2
VUSION 4.2 EDG2-0420-A 400 x 300 120 b/w/r 4 84.8 x 63.6 2000/1300 2
VUSION 4.5 EDG2-0450-A 480 x 176 117 b/w/r 4 104.2 x 38.2 2500/1500 2
VUSION 5.9 EDG2-0590-A 720 x 256 134 b/w/r 4 138.96 x 49.40 1100/550 2
VUSION 7.4 EDG2-0740-A 480 x 800 126 b/w/r 4 97 x 161.6 600/300 2
VUSION 9.7 EDG2-0970-A 960 x 672 121 b/w/r 4 201.60 x 141.12 300/150 2
VUSION 12.2 EDG2-1220-A 768 x 960 103 b/w/r 6 190.08 x 237.6 300/150 1
* Battery lifetime: 3 years with N updates per day
The content of all pages except page number 0 won't remain after a firmware update.