User Guide

Super Sesamee – Instruction Sheet
K637
Super Sesamee Combination Locks Feature:
• Hardened Steel Full Metal E-Coated Jackets.
• Hardened Steel E-Coated Shroud (Model K646).
• 7/16” Chrome Plated Molybdenum Shackles.
• Inside Shackle Clearances: 1” (K636); 2” (K637).
• All brass interior mechanisms.
• Double sided locking shackle for pull strength.
To Open
Padlock is pre set to 0-0-0-0. Turn the wheels to this combination.
Depress shackle, shackle springs open.
To Set or Change Your Combination:
1. Open lock.
2. Push hooped change pin down into open shackle hole as far as it
will go, with the hoop facing the two small screws on the top of
the lock.
3. While the pin is fully inserted, set the 4 wheels to your chosen
combination. Choose a number you will remember.
4. Pull out the change pin. Lock is now set to the new combination.
To Lock: Turn the wheels to scramble the numbers. Depress Shackle.
To Re-open: Dial-in your personal combination and depress the
shackle.It will spring open.
Maintenance: Lubricate occasionally with a non petroleum based
lubricant.
Opening in the Dark: All Super Sesamees have been designed for sight-
less operation. When turned in the correct direction, all wheels will stop
at 0-0-0-0. Once this has been done, simply turn each wheel in the
reverse direction and count the clicks until you reach your combination.
CCL Security Products is not liable for consequential or incidental
damages or for any expenses or losses incurred due to the use of
this product.
301 West Hintz Road | Wheeling, IL 60090 | Telephone: [phone] | Fax: [phone] | www.cclsecurity.com
2.06"
.85"
.44"
2.29"
1.44"
1.37"